Aptauja ilgs līdz 23. oktobrim.
Decision No.2/1998 of the Joint Committee of the Free Trade Agreement between the Republic of Latvia and the Czech Republic * The Principiality of Liechtenstein has a customs union with Switzerland, and is a Contracting Party to the Agreement of the European Economic Area. Having regard to the Free Trade Agreement between the Republic of Latvia and the Czech Republic, signed in Riga on 15 April l996 and Protocol 3 to this Agreement concerning the rules of origin of goods (the definition of the concept of "originating products") and related methods of administrative co-operation; Having in mind provisions of Articles 35, 36 and 38 of the Free Trade Agreement between the Republic of Latvia and the Czech Republic; Whereas within this Protocol 3 the definition of the term "originating products" needs to be amended to ensure the proper operation of the extended system of cumulation which permits the use of materials originating in the European Community; the Republic of Poland, the Republic of Hungary, the Czech Republic, the Slovak Republic, the Republic of Bulgaria, Romania, the Republic of Latvia, the Republic of Lithuania, the Republic of Estonia, the Republic of Slovenia, the European Economic Area, Iceland, Norway and Switzerland; Whereas it would seem advisable to maintain in operation by 31 December 2000 the system of flat rate charges provided for in Article 15 of this Protocol 3 in connection with the prohibition of drawback and exemption from customs duty; Whereas it would also be appropriate to extend the cumulation system to such products originating in the Republic of Turkey; Whereas to facilitate and simplify administrative tasks it would be desirable to amend the wording of Articles 3, 4 and 12 of this Protocol 3; Whereas taking into account of changes in processing techniques and shortages of certain raw materials, some corrections must be made to the list of working and processing requirements which non-originating materials have to fulfil to qualify for originating status, The Joint Committee consisted of the Representatives of the Parties HAS DECIDED AS FOLLOWS: Article 1 Protocol 3 concerning the rules of origin of goods (the definition of the concept of "originating products") and related methods of administrative cooperation is hereby amended as follows: 1. Paragraph 1(i) of Article 1 shall be replaced by the following: "(i) "added value" shall be taken to be the ex-works price minus the customs value of each of the materials incorporated which originate in the other countries referred to in Article 4 or, where the customs value is not known or cannot be ascertained, the first price verifiably paid for the products in the Party." 2.The whole Article 3 shall be deleted. 3. Article 4 shall be replaced by the following: " Article 4 Cumulation of origin l. Without prejudice to the provisions of Article 2 paragraph l, products shall be considered as originating in a Party if such products are obtained there, incorporating materials originating in the European Community, the Republic of Bulgaria, the Republic of Poland, the Republic of Hungary, the Czech Republic, the Slovak Republic, Romania, the Republic of Lithuania, the Republic of Latvia, the Republic of Estonia, the Republic of Slovenia, Iceland, Norway, Switzerland (including Liechtenstein)* or the Republic of Turkey in accordance with the provisions of the Protocol on rules of origin annexed to the Agreements between this Party and each of these countries, provided that the working or processing carried out in the Party goes beyond that referred to in Article 7 of this Protocol. It shall not be necessary that such materials have undergone sufficient working or processing. 2. Where the working or processing carried out in the Party does not go beyond the operations referred to in Article 7, the product obtained shall be considered as originating in the Party only where the value added there is greater than the value of the materials used originating in any one of the other countries referred to in paragraph 1. If this is not so, the product obtained shall be considered as originating in the country which accounts for the highest value of originating materials used in the manufacture in this Party. 3. Products, originating in one of the countries referred to in paragraph 1, which do not undergo any working or processing in the Party, retain their origin if exported into one of these countries. 4. The cumulation provided for in this Article may only be applied to materials and products which have acquired originating status by an application of rules of origin identical to those given in this Protocol". 4. Article 12 shall be replaced by the following: " Article 12 Principle of territoriality: l. Except as provided for in Article 4 and paragraph 3 of this Article, the conditions for acquiring originating status set out in Title II must continue to be fulfilled at all times in the Parties. 2. Except as provided for in Article 4, where originating goods exported from one of the Parties to another country return, they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that: (a) the returning goods are the same as those that were exported; and (b) they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported. 3. The acquisition of originating status in accordance with the conditions set out in Title II shall not be affected by working or processing done outside the Parties on materials exported from one of the Parties and subsequently reimported there, provided: (a) the said materials are wholly obtained in one of the Parties or have undergone working or processing beyond the insufficient operations listed in Article 7 prior to being exported; and (b) it can be demonstrated to the satisfaction of the customs authorities that: i) the reimported goods have been obtained by working or processing the exported materials; and ii) the total added value acquired outside the Parties by applying the provisions of this Article does not exceed 10% of the ex-works price of the end product for which originating status is claimed. 4. For the purposes of paragraph 3, the conditions for acquiring originating status set out in Title II shall not apply to working or processing done outside the Parties. But where, in the list in Annex II, a rule setting a maximum value for all the non-originating materials incorporated is applied in determining the originating status of the end product, the total value of the non-originating materials incorporated in the territory of the Party concerned, taken together with the total added value acquired outside the Party by applying the provisions of this Article, shall not exceed the stated percentage. 5. For the purposes of applying the provisions of paragraphs 3 and 4, "total added value" shall be taken to mean all costs arising outside the Parties, including the value of the materials incorporated there. 6. The provisions of paragraphs 3 and 4 shall not apply to products which do not fulfil the conditions set out in the list in Annex II or which can be considered sufficiently worked or processed only if the general values fixed in Article 6(2) are applied. 7. The provisions of paragraphs 3 and 4 shall not apply to products coming under Chapters 50 to 63 of the Harmonised System. 8. Any working or processing of the kind covered by the provisions of this Article and done outside the Parties shall be done under the outward processing arrangements, or similar arrangements." 5. In Paragraph 6 of Articles 15 the date "31 December 1998" shall be replaced by the new date "31 December 2000". 6. In Article 26 the reference "C2/CP3" shall be replaced by the new reference "CN22/CN23". 7. In Annex I. Note 5.2, the following new text "current conducting filaments" shall be added between the texts "artificial man-made filaments" and "synthetic man-made staple fibres of polypropylene". 8. In Annex I. Note 5.2 the text of the fifth example ("A carpet with tufts... are met.") shall be deleted. 9. In Annex II, between the rules for HS heading Nos 2202 and 2208 the following rule shall be inserted:
10. In Annex II, the rule for Charter 57 shall be replaced by:
1 For special conditions relating to products made of a mixture of textile materials, see introductory Note 5. 2 The use of jute yarn is authorised from 1.7.2000." 11.In Annex, the rule for HS heading No 7006 shall be replaced by:
1 SEMII - Semiconductor Equipment and Materials Institute Incorporated." 12. In Annex II the text of the rule for HS heading No 7601 shall be replaced by:
Article 2 1. This Decision shall enter into force on 1 January 1999 provided that before this date the Parties shall exchange the diplomatic notes confirming its approval by the Government of a respective Party. 2. If this Decision cannot enter into force in accordance with the paragraph 1 of this Article, it shall be applied on the date of a receipt of the latter diplomatic note confirming their approval by the Government of a respective Party. Done at Riga this 29th day of December, 1998 in two authentic copies in the English language. The Representative The Representative of the Republic of the Chech of Latvia Republic the State secretary of Deputy Minister of the Ministry Industry of Economy and Trade Jānis Vanags Jiri Maceška |
Tiesību akta pase
Statuss: Spēku zaudējis Valsts: Čehija Veids: starptautisks dokuments divpusējs Stājas spēkā: 10.10.2000. Parakstīts: 29.12.1998. Parakstīšanas vieta: RīgaZaudē spēku: 01.05.2004. Ratificēja: Saeima Atruna: Nav Deklarācija: Nav Publicēts: "Latvijas Vēstnesis", 345/347, 04.10.2000.Dokumenta valoda: Saistītie dokumenti
|