The Republic of Turkey (hereinafter referred
to as "Turkey") and the Republic of Latvia (hereinafter referred
to as "Latvia");
RECALLING their intention to participate
actively in the process of economic integration in Europe and
expressing their preparedness to co-operate in seeking ways and
means to strengthen this process;
REFERRING to the Agreement Establishing an
Association between Turkey and the European Economic Community
and Agreement on Free Trade and Trade-Related Matters between the
European Communities and the Republic of Latvia;
HAVING regard to the experience gained from
the co-operation developed between the Parties to this Agreement
(hereinafter referred to as "the Parties") as well as between
them and their main trading partners;
DECLARING their willingness to take action
with a view to promoting harmonious development of their trade as
well as to expanding and diversifying their mutual co-operation
in the fields of common interest, including fields not covered by
this Agreement, thus creating a framework and supportive
environment based on equality, non discrimination, and a balance
of rights and obligations;
RESOLVED to lay down for this purpose
provisions aimed at the progressive abolition of the obstacles to
trade between the Parties in accordance with the provisions of
these instruments, in particular those concerning the
establishment of free trade areas;
RECALLING the mutual interest of the Parties
in the continual reinforcement of the multilateral trading system
and considering their relations to the General Agreement on
Tariffs and Trade (herein after referred to as "GATT") and the
World Trade Organization (herein after referred to as "WTO"), the
provisions and instruments of which constitute a basis for their
foreign trade policy;
CONSIDERING the respective commitments of the
Parties to free trade and in particular to compliance with the
rights and obligations arising out of the GATT and the WTO.
HAVE DECIDED, in pursuance of these objectives, to conclude
the following Agreement (hereinafter referred to as "this
Agreement"):
No Customs duties of a fiscal nature shall be
introduced in trade between the Parties. The provisions of
Article 4 concerning the abolition of customs duties on imports
shall also apply to customs duties of a fiscal nature.
Protocol A lays down the other arrangements
applicable to the textile products.
The parties shall not apply their regulations
in sanitary and phytosanitary matters as an arbitrary or
unjustifiable discrimination or a disguised restriction on trade
between them.
If a Party finds that dumping, within the
meaning of Article VI of GATT is taking place in trade relations
governed by this Agreement, it may take appropriate measures
against this practice in accordance with Article VI of the GATT
and WTO Agreement on implementation of Article VI of the GATT
1994 and the rules established by agreements related to that
Article, under the conditions and in accordance with the
procedures laid down in Article 21.
Where any product is being imported in such
increased quantities and under such conditions as to cause, or
threaten to cause:
the Party concerned may take appropriate
measures under the conditions and in accordance with the
procedures laid down in Article 21 of this Agreement, Article XIX
of the GATT 1994 and the WTO Agreement on safeguards.
and where the situations referred to above
give rise, or are likely to give rise to major difficulties for
the exporting Party, that Party may take appropriate measures
under the conditions and in accordance with the procedures laid
down in Article 21. The measures shall be non-discriminatory and
be eliminated when conditions no longer justify their
maintenance.
The Parties shall progressively adjust any
state monopolies of a commercial character so as to ensure that
by the end of 1998, no discrimination regarding the conditions
under which goods are procured and marketed will exist between
nationals of the Parties. The Joint Committee will be informed
about the measures adopted to implement this objective.
The Parties undertake to authorize, in freely
convertible currency, in accordance to the provisions of Article
VIII of the Articles of the Agreement of the International
Monetary Fund, any payments on the current account of balance of
payments to the extent that the transactions underlying the
payments concern movements of goods.
Where either Party is in serious balance of
payment difficulties or under threat thereof, Turkey and Latvia
as the case may be, may, in accordance with the conditions laid
down within the framework of GATT and with Article VIII of the
Articles of Agreement of International Monetary Fund, adopt
restrictive measures including measures related to imports, which
shall be of limited duration and may not go beyond what is
necessary to remedy the balance of payment situation. Either
Party, as the case may be, shall inform the other Party forthwith
and present to the other Party, as soon as possible, of a time
schedule of their removal.
Nothing in this Agreement shall prevent a
Party from taking any measures which it considers necessary:
Amendments to this Agreement other than those
referred to in paragraph 3 of Article 29, which are approved by
the Joint Committee shall be submitted to the Parties for
ratification or acceptance in accordance with their internal
legal procedures and shall enter into force in accordance with
the provisions of Article 37.
Protocols and Annexes to this Agreement are an
integral part of this Agreement. The Joint Committee may decide
to amend the Protocols and Annexes in accordance with the
provision of paragraph 3 of the Article 30.
Each party may denounce this Agreement by
means of a written notification to the other Party. This
Agreement shall cease to apply six months after the date of
receipt of such notification.
This Agreement shall enter into force on the
first day of the second month, following the date on which the
Parties have notified each other through diplomatic channels,
that their internal legal requirements for the entry into force
of this Agreement have been fulfilled.
IN WITNESS WHEREOF the undersigned
plenipotentiaries, being duly authorized thereto, have signed
this Agreement.
DONE at Ankara, this 16 th day of June, 1998,
in two originals each in the English language both texts being
equally authentic.
- reduced to the 70% of the basic duty with
the entry into force of the Agreement,
- eliminated on 1.1.2000.
The Joint Committee may decide that paragraph
1 of Article 27 shall apply to other multilateral
conventions.
Trade in textile products between Turkey and
Latvia shall continue to be regulated by the Memorandum of
Understanding between the Government of Turkey and the Government
of Latvia concerning trade in textiles and clothing, accepted by
Note Verbale of the Ministry of Foreign Affairs of the Republic
of Latvia dated 11 January 1996 and numbered 32/n-52-43 addressed
to the Embassy of Turkey in Lithuania.
This MOU will become null and void when the
European Community abolishes the arrangements referred in the
above mentioned Protocol.
Imports into Latvia of the following products
originating in Turkey shall be subject to the concessions set out
below.
Imports into Turkey of the following products
originating in Latvia shall be subject to the concessions set out
below.
(a) "manufacture" means any kind of working or
processing including assembly or specific operations;
(b) "material" means any ingredient, raw
material, component or part, etc., used in the manufacture of the
product;
(c) "product" means the product being
manufactured, even if it is intended for later use in another
manufacturing operation;
(e) "customs value" means the value as
determined in accordance with the 1994 Agreement on
implementation of Article VII of the General Agreement on Tariffs
and Trade (WTO Agreement on customs valuation);
(f) "ex-works price" means the price paid for
the product ex works to the manufacturer in Latvia or Turkey in
whose undertaking the last working or processing is carried out,
provided the price includes the value of all the materials used,
minus any internal taxes which are, or may be, repaid when the
product obtained is exported;
(g) "value of materials" means the customs
value at the time of importation of the non-originating materials
used, or, if this is not known and cannot be ascertained, the
first ascertainable price paid for the materials in Latvia or
Turkey;
(h) "value of originating materials" means the
value of such materials as defined in subparagraph (g) applied
mutatis mutandis ;
(i) "added value" shall be taken to be the
ex-works price minus the customs value of each of the products
incorporated which did not originate in the country in which
those products were obtained;
(j) "chapters" and "headings" mean the
chapters and the headings (four-digit codes) used in the
nomenclature which makes up the Harmonized
Commodity Description and Coding System,
referred to in this Protocol as "the Harmonized System" or
"HS";
(k) "classified" refers to the classification
of a product or material under a particular heading;
(l) "consignment" means products which are
either sent simultaneously from one exporter to one consignee or
covered by a single transport document covering their shipment
from the exporter to the consignee or, in the absence of such a
document, by a single invoice;
(m) "territories" includes territorial
waters.
1. For the purpose of implementing this
Agreement, the following products shall be considered as
originating in Latvia:
(a) products wholly obtained in Latvia within
the meaning of Article 5 of this Protocol;
(b) products obtained in Latvia incorporating
materials which have not been wholly obtained there, provided
that such materials have undergone sufficient working or
processing in Latvia within the meaning of Article 6 of this
Protocol.
2. For the purpose of implementing this
Agreement, the following products shall be considered as
originating in Turkey:
(a) products wholly obtained in Turkey within
the meaning of Article 5 of this Protocol;
(b) products obtained in Turkey incorporating
materials which have not been wholly obtained there, provided
that such materials have undergone sufficient working or
processing in Turkey within the meaning of Article 6 of this
Protocol.
1. Materials originating in Latvia shall be
considered as materials originating in Turkey when incorporated
into a product obtained there. It shall not be necessary that
such materials have undergone sufficient working or processing,
provided they have undergone working or processing going beyond
that referred to in Article 7(1) of this Protocol.
2. Materials originating in Turkey shall be
considered as materials originating in Latvia when incorporated
into a product obtained there. It shall not be necessary that
such materials have undergone sufficient working or processing,
provided they have undergone working or processing going beyond
that referred to in Article 7(1) of this Protocol.
I. The following shall be considered as wholly
obtained in Latvia or Turkey:
(f) products of sea fishing and other products
taken from the sea outside the territorial waters of Latvia or
Turkey by their vessels;
(g) products made aboard their factory ships
exclusively from products referred to in subparagraph (f);
(h) used articles collected there fit only for
the recovery of raw materials, including used tyres fit only for
retreading or for use as waste;
(j) products extracted from marine soil or
subsoil outside their territorial waters provided that they have
sole rights to work that soil or subsoil;
(k) goods produced there exclusively from the
products specified in subparagraphs (a) to (j).
2. The terms "their vessels" and "their
factory ships" in paragraph 1(f) and (g) shall apply only to
vessels and factory ships:
(c) which are owned to an extent of at least
50 per cent by nationals of Latvia or of Turkey, or by a company
with its head office in one of the Parties, of which the manager
or managers, Chairman of the Board of Directors or the
Supervisory Board, and the majority of the members of such boards
are nationals of Latvia or Turkey and of which, in addition, in
the case of partnerships or limited companies, at least half the
capital belongs to Latvia or Turkey or to public bodies or
nationals of Latvia or Turkey;
(e) of which at least 75 per cent of the crew
are nationals of Latvia or of Turkey.
1. For the purposes of Article 2, products
which are not wholly obtained are considered to be sufficiently
worked or processed when the conditions set out in the list in
Annex II of this Protocol are fulfilled.
The conditions referred to above indicate, for
all products covered by this Agreement, the working or processing
which must be carried out on non-originating materials used in
manufacturing and apply only in relation to such materials.
Accordingly, it follows that if a product, which has acquired
originating status by fulfilling the conditions set out in the
list is used in the manufacture of another product, the
conditions applicable to the product in which it is incorporated
do not apply to it, and no account shall be taken of the
non-originating materials which may have been used in its
manufacture.
2. Notwithstanding paragraph 1,
non-originating materials which, according to the conditions set
out in the list, should not be used in the manufacture of a
product may nevertheless be used, provided that:
(a) their total value does not exceed 10 per
cent of the ex-works price of the product;
(b) any of the percentages given in the list
for the maximum value of non-originating materials are not
exceeded through the application of this paragraph.
This paragraph shall not apply to products
falling within Chapters 50 to 63 of the Harmonized System.
3. Paragraphs 1 and 2 shall apply except as
provided in Article 7.
1. Without prejudice to paragraph 2, the
following operations shall be considered as insufficient working
or processing to confer the status of originating products,
whether or not the requirements of Article 6 are satisfied:
2. All the operations carried out in either
Latvia or Turkey on a given product shall be considered together
when determining whether the working or processing undergone by
that product is to be regarded as insufficient within the meaning
of paragraph 1.
1. The unit of qualification for the
application of the provisions of this Protocol shall be the
particular product which is considered as the basic unit when
determining classification using the nomenclature of the
Harmonized System.
2. Where, under General Rule 5 of the
Harmonized System, packaging is included with the product for
classification purposes, it shall be included for the purposes of
determining origin.
Accessories, spare parts and tools dispatched
with a piece of equipment, machine, apparatus or vehicle, which
are part of the normal equipment and included in the price
thereof or which are not separately invoiced, shall be regarded
as one with the piece of equipment, machine, apparatus or vehicle
in question.
Sets, as defined in general rule 3 of the
Harmonized System, shall be regarded as originating when all
component products are originating. Nevertheless, when a set is
composed of originating and non-originating products, the set as
a whole shall be regarded as originating, provided that the value
of the non-originating products does not exceed 15 per cent of
the ex-works price of the set.
In order to determine whether a product
originates, it shall not be necessary to determine the origin of
the following which might be used in its manufacture :
1. The conditions set out in Title II relative
to the acquisition of originating status must be fulfilled
without interruption in Latvia or Turkey, except as provided for
in Article 4.
2. If originating goods exported from Latvia
or Turkey to another country are returned, except in so far as
provided for in Article 4 they must be considered as
non-originating, unless it can be demonstrated to the
satisfaction of the customs authorities that:
1. The preferential treatment provided for
under the Agreement applies only to products, satisfying the
requirements of this Protocol, which are transported directly
between Latvia and Turkey or through the territories of the other
countries referred to in Article 4. However, products
constituting one single consignment may be transported through
other territories with, should the occasion arise, trans-shipment
or temporary warehousing in such territories, provided that they
remain under the surveillance of the customs authorities in the
country of transit or warehousing and do not undergo operations
other than unloading, reloading or any operation designed to
preserve them in good condition.
Originating products may be transported by
pipeline across territory other than that of Latvia or
Turkey.
2. Evidence that the conditions set out in
paragraph 1 have been fulfilled shall be supplied to the customs
authorities of the importing country by the production of:
(a) a single transport document covering the
passage from the exporting country through the country of
transit; or
(c) failing these, any substantiating
documents.
1. Originating products, sent for exhibition
in a country other than those referred to in Article 4 and sold
after the exhibition for importation in Latvia or Turkey shall
benefit on importation from the provisions of the Agreement
provided it is shown to the satisfaction of the customs
authorities that :
2. A proof of origin must be issued or made
out in accordance with the provisions of Title V and
submitted to the customs authorities of the importing country in
the normal manner. The name and address of the exhibition must be
indicated thereon. Where necessary, additional documentary
evidence of the conditions under which they have been exhibited
may be required.
3. Paragraph 1 shall apply to any trade,
industrial, agricultural or crafts exhibition, fair or similar
public show or display which is not organized for private
purposes in shops or business premises with a view to the sale of
foreign products, and during which the products remain under
customs control.
1. Products originating in Latvia shall, on
importation into Turkey and products originating in Turkey shall,
on importation into Latvia benefit from this Agreement upon
submission of either :
2. Notwithstanding paragraph 1, originating
products within the meaning of this Protocol shall, in the cases
specified in Article 26, benefit from this Agreement without it
being necessary to submit any of the documents referred to
above.
1. Notwithstanding Article 17(7), a movement
certificate EUR.1 may exceptionally be issued after exportation
of the products to which it relates if:
2. For the implementation of paragraph 1, the
exporter must indicate in his application the place and date of
exportation of the products to which the movement certificate
EUR.1 relates, and state the reasons for his request.
3. The customs authorities may issue a
movement certificate EUR.1 retrospectively only after verifying
that the information supplied in the exporter's application
agrees with that in the corresponding file.
4. Movement certificates EUR.1 issued
retrospectively must be endorsed with one of the following
phrases:
5. The endorsement referred to in paragraph 4
shall be inserted in the "Remarks" box of the movement
certificate EUR.1.
When originating products are placed under the
control of a customs office in Latvia or Turkey, it shall be
possible to replace the original proof of origin by one or more
movement certificates EUR.1 for the purpose of sending all or
some of these products elsewhere within Latvia or Turkey. The
replacement movement certificate(s) EUR.1 shall be issued by the
customs office under whose control the products are placed.
1. An invoice declaration as referred to in
Article 16(1)(b) may be made out:
2. An invoice declaration may be made out if
the products concerned can be considered as products originating
in Latvia, Turkey or in one of the other countries referred to in
Article 4 and fulfill the other requirements of this
Protocol.
3. The exporter making out an invoice
declaration shall be prepared to submit at any time, at the
request of the customs authorities of the exporting country, all
appropriate documents proving the originating status of the
products concerned as well as the fulfillment of the other
requirements of this Protocol.
4. An invoice declaration shall be made out by
the exporter by typing, stamping or printing on the invoice, the
delivery note or another commercial document, the declaration,
the text of which appears in Annex IV, using one of the
linguistic versions set out in that Annex and in accordance with
the provisions of the domestic law of the exporting country. If
the declaration is handwritten, it shall be written in ink in
printed characters.
5. Invoice declarations shall bear the
original signature of the exporter in manuscript. However, an
approved exporter within the meaning of Article 22 shall not be
required to sign such declarations provided that he gives the
customs authorities of the exporting country a written
undertaking that he accepts full responsibility for any invoice
declaration which identifies him as if it had been signed in
manuscript by him.
6. An invoice declaration may be made out by
the exporter when the products to which it relates are exported,
or after exportation on condition that it is presented in the
importing country no longer than two years after the importation
of the products to which it relates.
Proofs of origin shall be submitted to the
customs authorities of the importing country in accordance with
the procedures applicable in that Party. The said authorities may
require a translation of a proof of origin and may also
require the import declaration to be accompanied by a statement
from the importer to the effect that the products meet the
conditions required for the implementation of the Agreement.
Where, at the request of the importer and on
the conditions laid down by the customs authorities of the
importing country, dismantled or non-assembled products within
the meaning of General Rule 2(a) of the Harmonized System falling
within Sections XVI and XVII or heading Nos. 7308 and 9406 of the
Harmonized System are imported by installments, a single proof of
origin for such products shall be submitted to the customs
authorities upon importation of the first installment.
The documents referred to in Articles 17(3)
and 21(3) used for the purpose of proving that products covered
by a movement certificate EUR.1 or an invoice declaration can be
considered as products originating in Latvia, Turkey or in one of
the other countries referred to in Article 4 and fulfill the
other requirements of this Protocol may consist inter alia
of the following:
Where disputes arise in relation to the
verification procedures of Article 32 which cannot be
settled between the customs authorities requesting a verification
and the customs authorities responsible for carrying out this
verification or where they raise a question as to the
interpretation of this Protocol, they shall be submitted to the
Joint Committee.
In all cases the settlement of disputes
between the importer and the customs authorities of the importing
country shall be under the legislation of the said Party.
Penalties shall be imposed on any person who
draws up, or causes to be drawn up, a document which contains
incorrect information for the purpose of obtaining a preferential
treatment for products.
A Sub-Committee on customs and origin matters
shall be set up under the Joint Committee to assist it in
carrying out its duties and to ensure a continuous information
and consultation processed between experts.
It shall be composed of experts from both
Parties responsible for questions related to customs and origin
matters.
The Annexes to this Protocol shall form an
integral part thereof.
The Joint Committee may decide to amend the provisions of this
Protocol.
Having regard to the Decision No 1/95 of the
EC - Turkey Association Council on the Customs Union and the
Agreement on Free Trade and Trade Related Matters between the
European Communities and Latvia;
Considering that an extended system of
cumulation shall enable the use of materials originating in
Turkey, Latvia, the EC, Poland, Hungary, the Czech Republic, the
Slovak Republic, Bulgaria, Romania, Lithuania, Estonia, Slovenia,
Iceland, Norway or Switzerland in order to facilitate trade,
prevent possible trade diversions and improve the effectiveness
of respective arrangements on trade among these countries;
The Parties hereby declare that, related
provisions of the Protocol C concerning the EC, Hungary, Poland,
the Czech Republic, the Slovak Republic, Bulgaria, Romania,
Lithuania, Estonia, Slovenia, Iceland, Norway or Switzerland
shall be applicable after concluding agreements by Turkey and
Latvia or after amending related Articles of the existing
agreements with these countries and exchanging of letters between
Turkey and Latvia about implementation thereof. Taking into
consideration the Customs Union between Turkey and the EC,
necessary arrangement should be made accordingly. Turkey shall
inform Latvian side on the progress made in this respect between
Turkey and the EC.
The list sets out the conditions required for
all products to be considered as sufficiently worked or processed
within the meaning of Article 6 of the Protocol.
2.1 The first two columns in the list describe
the product obtained. The first column gives the heading number
or chapter number used in the Harmonized System and the second
column gives the description of goods used in that system for
that heading or chapter. For each entry in the first two columns
a rule is specified in columns 3 or 4. Where, in some cases, the
entry in the first column is preceded by an 'ex', this signifies
that the rules in columns 3 or 4 apply only to the part of that
heading as described in column 2.
2.2 Where several heading numbers are grouped
together in column 1 or a chapter number is given and the
description of products in column 2 is therefore given in general
terms, the adjacent rules in columns 3 or 4 apply to all products
which, under the Harmonized System, are classified in headings of
the chapter or in any of the headings grouped together in column
1.
2.3 Where there are different rules in the
list applying to different products within a heading, each indent
contains the description of that part of the heading covered by
the adjacent rules in columns 3 or 4.
2.4 Where, for an entry in the first two
columns, a rule is specified in both columns 3 and 4, the
exporter may opt, as an alternative, to apply either the rule set
out in column 3 or that set out in column 4. If no origin rule is
given in column 4, the rule set out in column 3 has to be
applied.
3.1 The provisions of Article 6 of the
Protocol concerning products having acquired originating status
which are used in the manufacture of other products apply
regardless of whether this status has been acquired inside the
factory where these products are used or in another factory in
Latvia or in Turkey.
An engine of heading No 8407, for which the
rule states that the value of the non-originating materials which
may be incorporated may not exceed 40 per cent of the ex-works
price, is made from "other alloy steel roughly shaped by forging"
of heading No ex 7224.
If this forging has been forged in Turkey from
a non-originating ingot, it has already acquired originating
status by virtue of the rule for heading No ex 7224 in the list.
The forging can then count as originating in the value
calculation for the engine regardless of whether it was produced
in the same factory or in another factory in Turkey. The value of
the non-originating ingot is thus not taken into account when
adding up the value of the non-originating materials used.
3.2 The rule in the list represents the
minimum amount of working or processing required and the carrying
out of more working or processing also confers originating
status; conversely, the carrying out of less working or
processing cannot confer originating status. Thus if a rule
provides that non-originating material at a certain level of
manufacture may be used, the use of such material at an earlier
stage of manufacture is allowed and the use of such material at a
later stage is not.
3.3 Without prejudice to Note 3.2 where a rule
states that "materials of any heading" may be used, materials of
the same heading as the product may also be used, subject,
however, to any specific limitations which may also be contained
in the rule. However, the expression "manufacture from materials
of any heading, including other materials of heading No ... "
means that only materials classified in the same heading as the
product of a different description than that of the product as
given in column 2 of the list may be used.
3.4 When a rule in the list specifies that a
product may be manufactured from more than one material, this
means that any one or more materials may be used. It does not
require that all be used.
The rule for fabrics of heading Nos 5208 to
5212 provides that natural fibres may be used and that chemical
materials, among other materials, may also be used. This does not
mean that both have to be used; it is possible to use one or the
other or both.
3.5 Where a rule in the list specifies that a
product must be manufactured from a particular material, the
condition obviously does not prevent the use of other materials
which, because of their inherent nature, cannot satisfy the rule.
(See also Note 6.2 below in relation to textiles).
The rule for prepared foods of heading No.
1904 which specifically excludes the use of cereals and their
derivatives does not prevent the use of mineral salts, chemicals
and other additives which are not products from cereals.
However, this does not apply to products
which, although they cannot be manufactured from the particular
material specified in the list, can be produced from a material
of the same nature at an earlier stage of manufacture.
In the case of an article of apparel of ex
Chapter 62 made from non-woven materials, if the use of only
non-originating yarn is allowed for this class of article, it is
not possible to start from non-woven cloth - even if non-woven
cloths cannot normally be made from yarn. In such cases, the
starting material would normally be at the stage before yarn -
that is the fibre stage.
3.6 Where, in a rule in the list, two
percentages are given for the maximum value of non-originating
materials that can be used, then these percentages may not be
added together. In other words, the maximum value of all the
non-originating materials used may never exceed the highest of
the percentages given. Furthermore, the individual percentages
must not be exceeded in relation to the particular materials they
apply to.
4.1 The term "natural fibres" is used in the
list to refer to fibres other than artificial or synthetic
fibres. It is restricted to the stages before spinning takes
place, including waste, and, unless otherwise specified, includes
fibres that have been carded, combed or otherwise processed but
not spun.
4.2 The term "natural fibres" includes
horsehair of heading No 0503, silk of heading Nos 5002 and
5003 as well as the wool fibres, fine or coarse animal hair of
heading Nos 5101 to 5105, the cotton fibres of heading Nos 5201
to 5203 and the other vegetable fibres of heading Nos 5301 to
5305.
4.3 The terms "textile pulp", "chemical
materials" and "paper-making materials" are used in the list to
describe the materials not classified in Chapters 50 to 63, which
can be used to manufacture artificial, synthetic or paper fibres
or yarns.
4.4 The term "man-made staple fibres" is used
in the list to refer to synthetic or artificial filament tow,
staple fibres or waste, of heading Nos 5501 to 5507.
5.1 Where for a given product in the list a
reference is made to this note, the conditions set out in column
3 shall not be applied to any basic textile materials, used in
the manufacture of this product, which, taken together, represent
10 per cent or less of the total weight of all the basic textile
materials used. (See also Notes 5.3 and 5.4 below).
5.2 However, the tolerance mentioned in Note
5.1 may only be applied to mixed products which have been made
from two or more basic textile materials.
- yarn made of polyurethane segmented with
flexible segments of polyether whether or not gimped,
- yarn made of polyurethane segmented with
flexible segments of polyester whether or not gimped,
- products of heading No 5605 (metallized
yarn) incorporating strip consisting of a core of aluminium foil
or of a core of plastic film whether or not coated with aluminium
powder, of a width not exceeding 5 mm, sandwiched by means of a
transparent or coloured adhesive between two layers of plastic
film ,
- other products of heading No 5605.
A yarn of heading No 5205 made from cotton
fibres of heading No 5203 and synthetic staple fibres of heading
No 5506 is a mixed yarn. Therefore, non-originating synthetic
staple fibres that do not satisfy the origin rules (which require
manufacture from chemical materials or textile pulp) may be used
up to a weight of 10 per cent of the yarn.
A woollen fabric of heading No 5112 made from
woollen yarn of heading No 5107 and synthetic yarn of staple
fibres of heading No 5509 is a mixed fabric. Therefore synthetic
yarn which does not satisfy the origin rules (which require
manufacture from chemical materials or textile pulp) or woollen
yarn that does not satisfy the origin rules (which require
manufacture from natural fibres, not carded or combed or
otherwise prepared
for spinning) or a combination of the two may
be used provided their total weight does not exceed 10 per cent
of the weight of the fabric.
Tufted textile fabric of heading No 5802 made
from cotton yarn of heading No 5205 and cotton fabric of heading
No 5210 is only a mixed product if the cotton fabric is itself a
mixed fabric being made from yarns classified in two separate
headings or if the cotton yarns used are themselves mixtures.
If the tufted textile fabric concerned had
been made from cotton yarn of heading No 5205 and synthetic
fabric of heading No 5407, then, obviously, the yarns used are
two separate basic textile materials and the tufted textile
fabric is accordingly a mixed product.
A carpet with tufts made from both artificial
yarns and cotton yarns and with a jute backing is a mixed product
because three basic textile materials are used. Thus, any
non-originating materials that are at a later stage of
manufacture than the rule allows may be used, provided their
total weight does not exceed 10 per cent of the weight of the
textile materials of the carpet. Thus, both the jute backing
and/or the artificial yarns could be imported at that stage of
manufacture, provided the weight conditions are met.
5.3 In the case of products incorporating
"yarn made of polyurethane segmented with flexible segments of
polyether whether or not gimped" this tolerance is 20 per cent in
respect of this yarn.
5.4 In the case of products incorporating
"strip consisting of a core of aluminium foil or of a core of
plastic film whether or not coated with aluminium powder, of a
width not exceeding 5 mm, sandwiched by means of an adhesive
between two layers of plastic film", this tolerance is 30 per
cent in respect of this strip.
6.1 In the case of those textile products
which are marked in the list by a footnote referring to this
note, textile materials, with the exception of linings and
interlinings, which do not satisfy the rule set out in the list
in column 3 for the made-up product concerned may be used
provided that they are classified in a heading other than that of
the product and that their value does not exceed 8 per cent of
the ex-works price of the product.
6.2 Without prejudice to Note 6.3, materials
which are not classified within Chapters 50 to 63 may be used
freely in the manufacture of textile products, whether or not
they contain textiles.
If a rule in the list provides that for a
particular textile item, such as trousers, yarn must be used,
this does not prevent the use of metal items, such as buttons,
because buttons are not classified within Chapters 50 to 63. For
the same reason, it does not prevent the use of slide-fasteners
even though slide-fasteners normally contain textiles.
6.3 Where a percentage rule applies, the value
of materials which are not classified within Chapters 50 to 63
must be taken into account when calculating the value of the
non-originating materials incorporated.
7.1 For the purposes of heading Nos ex 2707,
2713 to 2715, ex 2901, ex 2902 and ex 3403, the "specific
processes" are the following:
(f) the process comprising all the following
operations: processing with concentrated sulphuric acid, oleum or
sulphuric anhydride; neutralization with alkaline agents;
decolorization and purification with naturally active earth,
activated earth, activated charcoal or bauxite;
(i) isomerization.
7.2 For the purposes of heading Nos 2710, 2711 and 2712, the
"specific processes" are the following:
(f) the process comprising all the following
operations: processing with concentrated sulphuric acid, oleum or
sulphuric anhydride; neutralization with alkaline agents;
decolorization and purification with naturally active earth,
activated earth, activated charcoal or bauxite;
(k) in respect of heavy oils falling within
heading No ex 2710 only, desulphurization with hydrogen resulting
in a reduction of at least 85 per cent of the sulphur content of
the products processed (ASTM D 1266-59 T method);
(l) in respect of products falling within
heading No 2710 only, deparaffining by a process other than
filtering;
(m) in respect of heavy oils falling within
heading No ex 2710 only, treatment with hydrogen at a pressure of
more than 20 bar and a temperature of more than 250°C with the
use of a catalyst, other than to effect desulphurization, when
the hydrogen constitutes an active element in a chemical
reaction. The further treatment with hydrogen of lubricating oils
of heading No ex 2710 (e.g. hydrofinishing or decolorization) in
order, more especially, to improve colour or stability shall not,
however, be deemed to be a specific process;
(n) in respect of fuel oils falling within
heading No ex 2710 only, atmospheric distillation, on condition
that less than 30 per cent of these products distil, by volume,
including losses, at 300°C by the ASTM D 86 method;
(o) in respect of heavy oils other than gas
oils and fuel oils falling within heading No ex 2710 only,
treatment by means of a high-frequency electrical
brush-discharge.
7.3 For the purposes of heading Nos ex 2707,
2713 to 2715, ex 2901, ex 2902 and ex 3403, simple
operations such as cleaning, decanting, desalting, water
separation, filtering, colouring, marking, obtaining a sulphur
content as a result of mixing products with different sulphur
contents, any combination of these operations or like operations
do not confer origin.
The products mentioned in the list may not all
be covered by the Agreement.
|
HS heading
No:
|
Description of
product
|
Working or processing
carried out on non-originating materials that confers
originating status
|
|
(1)
|
(2)
|
(3) or
(4)
|
| Chapter
01 |
Live
animals |
All
the animals of Chapter 1 used must be wholly
obtained |
|
| Chapter
02 |
Meat
and edible meat offal |
Manufacture in which all the materials of Chapters 1 and
2 used must be wholly obtained |
|
| Chapter
03 |
Fish
and crustaceans, molluscs and other aquatic
invertebrates |
Manufacture in which all the materials of Chapter 3 used
must be wholly obtained |
|
| ex Chapter
04 |
Dairy
produce; birds' eggs; natural honey; edible products of
animal origin, not elsewhere specified or included; except
for: |
Manufacture in which all the materials of Chapter 4 used
must be wholly obtained |
|
| 0403 |
Buttermilk, curdled milk and cream, yoghurt, kephir and
other fermented or acidified milk and cream, whether or not
concentrated or containing added sugar or other sweetening
matter or flavoured or containing added fruit, nuts or
cocoa |
Manufacture in which:
- all the materials of Chapter 4 used
must be wholly obtained;
- any fruit juice (except those of
pineapple, lime or grapefruit) of heading No 2009 used must
already be originating;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
| ex Chapter
05 |
Products of animal origin, not elsewhere specified or
included; except for: |
Manufacture in which all the materials of Chapter 5 used
must be wholly obtained |
|
| ex
0502 |
Prepared pigs', hogs' or boars' bristles and
hair |
Cleaning, disinfecting, sorting and straightening of
bristles and hair |
|
| Chapter
06 |
Live
trees and other plants; bulbs, roots and the like; cut
flowers and ornamental foliage |
Manufacture in which:
- all the materials of Chapter 6 used
must be wholly obtained;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| Chapter
07 |
Edible vegetables and certain roots and
tubers |
Manufacture in which all the materials of Chapter 7 used
must be wholly obtained |
|
|
Chapter 08
|
Edible fruit and nuts; peel of citrus fruits or
melons |
Manufacture in which:
- all the fruit and nuts used must be
wholly obtained;
- the value of any materials of Chapter
17 used does not exceed 30 % of the value of the ex-works
price of the product
|
|
| ex Chapter
09 |
Coffee, tea, maté and spices; except for: |
Manufacture in which all the materials of Chapter 9 used
must be wholly obtained |
|
| 0901 |
Coffee, whether or not roasted or decaffeinated; coffee
husks and skins; coffee substitutes containing coffee in any
proportion |
Manufacture from materials of any heading |
|
| 0902 |
Tea,
whether or not flavoured |
Manufacture from materials of any heading |
|
| ex
0910 |
Mixtures of spices |
Manufacture from materials of any heading |
|
| Chapter
10 |
Cereals |
Manufacture in which all the materials of Chapter 10 used
must be wholly obtained |
|
| ex Chapter
11 |
Products of the milling industry; malt; starches; inulin;
wheat gluten; except for: |
Manufacture in which all the cereals, edible vegetables,
roots and tubers of heading No 0714 or fruit used must be
wholly obtained |
|
| ex
1106 |
Flour, meal and powder of the dried, shelled leguminous
vegetables of heading No 0713 |
Drying and milling of leguminous vegetables of heading No
0708 |
|
| Chapter
12 |
Oil
seeds and oleaginous fruits; miscellaneous grains, seeds and
fruit; industrial or medicinal plants; straw and
fodder |
Manufacture in which all the materials of Chapter 12 used
must be wholly obtained |
|
| 1301 |
Lac;
natural gums, resins, gum-resins and oleoresins (for example,
balsams) |
Manufacture in which the value of any materials of
heading No 1301 used may not exceed 50% of the ex-works price
of the product |
|
| 1302 |
Vegetable saps and extracts; pectic substances,
pectinates and pectates; agar-agar and other mucilages and
thickeners, whether or not modified, derived from vegetable
products: |
|
|
| |
-
Mucilages and thickeners, modified, derived from vegetable
products |
Manufacture from non-modified mucilages and
thickeners |
|
| |
-
Other |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| Chapter
14 |
Vegetable plaiting materials; vegetable products not
elsewhere specified or included |
Manufacture in which all the materials of Chapter 14 used
must be wholly obtained |
|
| ex Chapter
15 |
Animal or vegetable fats and oils and their cleavage
products; prepared edible fats; animals or vegetable waxes;
except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 1501 |
Pig
fat (including lard) and poultry fat, other than that of
heading No. 0209 or 1503: |
|
|
| |
-
Fats from bones or waste |
Manufacture from materials of any heading except those of
heading Nos 0203, 0206 or 0207 or bones of heading No
0506 |
|
| |
-
Other |
Manufacture from meat or edible offal of swine of heading
No 0203 or 0206 or of meat and edible offal of poultry of
heading No 0207 |
|
| 1502 |
Fats
of bovine animals, sheep or goats, other than those of
heading No. 1503: |
|
|
| |
-
Fats from bones or waste |
Manufacture from materials of any heading except those of
heading Nos 0201, 0202, 0204 or 0206 or bones of heading No
0506 |
|
| |
-
Other |
Manufacture in which all the materials of Chapter 2 used
must be wholly obtained |
|
| 1504 |
Fats
and oils and their fractions, of fish or marine mammals,
whether or not refined, but not chemically
modified: |
|
|
| |
-
Solid fractions |
Manufacture from materials of any heading including other
materials of heading No 1504 |
|
| |
-
Other |
Manufacture in which all the materials of Chapters 2 and
3 used must be wholly obtained |
|
| ex
1505 |
Refined lanolin |
Manufacture from crude wool grease of heading No
1505 |
|
| 1506 |
Other
animals fats and oils and their fractions, whether or not
refined, but not chemically modified: |
|
|
| |
-
Solid fractions |
Manufacture from materials of any heading including other
materials of heading No 1506 |
|
| |
-
Other |
Manufacture in which all the materials of Chapter 2 used
must be wholly obtained |
|
| 1507 to
1515 |
Vegetable oils and their fractions: |
|
|
| |
-
Soya, ground nut, palm, copra, palm kernel, babassu, tung and
oiticica oil, myrtle wax and Japan wax, fractions of jojoba
oil and oils for technical or industrial uses other than the
manufacture of foodstuffs for human consumption |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| |
-
Solid fractions, except for that of jojoba oil |
Manufacture from other materials of heading Nos. 1507 to
1515 |
|
| |
-
Other |
Manufacture in which all the vegetable materials used
must be wholly obtained |
|
|
1516
|
Animal or vegetable fats and oils and their fractions,
partly or wholly hydrogenated, inter-esterified,
re-esterified or elaidinized, whether or not refined, but not
further prepared |
Manufacture in which:
- all the materials of Chapter 2 used
must be wholly obtained;
- all the vegetable materials used must
be wholly obtained. However, materials of headings 1507,
1508, 1511 and 1513 may be used
|
|
| 1517 |
Margarine; edible mixtures or preparations of animal or
vegetable fats or oils or of fractions of different fats or
oils of this Chapter, other than edible fats or oils or their
fractions of heading No 1516 |
Manufacture in which:
- all the materials of Chapters 2 and 4
used must be wholly obtained;
- all the vegetable materials used must
be wholly obtained. However, materials of headings 1507,
1508, 1511 and 1513 may be used
|
|
| Chapter
16 |
Preparations of meat, of fish or of crustaceans, molluscs
or other aquatic invertebrates |
Manufacture from animals of Chapter 1. All the materials
of Chapter 3 used must be wholly obtained |
|
| ex Chapter
17 |
Sugars and sugar confectionery; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
1701 |
Cane
or beet sugar and chemically pure sucrose, in solid form,
flavoured or coloured |
Manufacture in which the value of any materials of
Chapter 17 used does not exceed 30% of the ex-works price of
the product |
|
| 1702 |
Other
sugars, including chemically pure lactose, maltose, glucose
and fructose, in solid form; sugar syrups not containing
added flavouring or colouring matter; artificial honey,
whether or not mixed with natural honey; caramel: |
|
|
| |
-
Chemically pure maltose and fructose |
Manufacture from materials of any heading including other
materials of heading No 1702 |
|
| |
-
Other sugars in solid form, flavoured or coloured |
Manufacture in which the value of any materials of
Chapter 17 used does not exceed 30% of the ex-works price of
the product |
|
| |
-
Other |
Manufacture in which all the materials used must already
be originating |
|
| ex
1703 |
Molasses resulting from the extraction or refining of
sugar, flavoured or coloured |
Manufacture in which the value of any materials of
Chapter 17 used does not exceed 30% of the ex-works price of
the product |
|
| 1704 |
Sugar
confectionery (including white chocolate), not containing
cocoa |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
| Chapter
18 |
Cocoa
and cocoa preparations |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
| 1901 |
Malt
extract; food preparations of flour, meal, starch or malt
extract, not containing cocoa or containing less than 40% by
weight of cocoa calculated on a totally defatted basis, not
elsewhere specified or included; food preparations of goods
of heading Nos. 0401 to 0404, not containing cocoa or
containing less than 5% by weight of cocoa calculated on a
totally defatted basis, not elsewhere specified or
included: |
|
|
| |
-
Malt extract |
Manufacture from cereals of Chapter 10 |
|
| |
-
Other |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
| 1902 |
Pasta, whether or not cooked or stuffed (with meat or
other substances) or otherwise prepared, such as spaghetti,
macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni;
couscous, whether or not prepared: |
|
|
| |
-
Containing 20% or less by weight of meat, meat offal, fish,
crustaceans or molluscs |
Manufacture in which all the cereals and derivatives
(except durum wheat and its derivatives) used must be wholly
obtained |
|
| |
-
Containing more than 20% by weight of meat, meat offal, fish,
crustaceans or molluscs |
Manufacture in which:
- all cereals and derivatives (except
durum wheat and its derivatives) used must be wholly
obtained;
- all the materials of Chapters 2 and 3
used must be wholly obtained
|
|
| 1903 |
Tapioca and substitutes therefor prepared from starch, in
the form of flakes, grains, pearls, siftings or in similar
forms |
Manufacture from materials of any heading except potato
starch of heading No. 1108 |
|
| 1904 |
Prepared foods obtained by the swelling or roasting of
cereals or cereal products (for example, corn flakes);
cereals, other than maize (corn) in grain form, or in the
form of flakes or other worked grains (except flour and
meal), pre-cooked, or otherwise prepared, not elsewhere
specified or included |
Manufacture:
- from materials not classified within
heading
No 1806;
- in which all the cereals and flour
(except durum wheat and its derivates) used must be wholly
obtained;
- in which the value of any materials of
Chapter 17 used does not exceed 30% of the ex-works price
of the product
|
|
| 1905 |
Bread, pastry, cakes, biscuits and other bakers' wares,
whether or not containing cocoa; communion wafers, empty
cachets of a kind suitable for pharmaceutical use, sealing
wafers, rice paper and similar products |
Manufacture from materials of any heading
except those of Chapter 11
|
|
| ex Chapter
20 |
Preparations of vegetables, fruit, nuts or other parts of
plants; except for: |
Manufacture in which all the fruit, nuts or vegetables
used must be wholly obtained |
|
| ex
2001 |
Yams,
sweet potatoes and similar edible parts of plants containing
5% or more by weight of starch, prepared or preserved by
vinegar or acetic acid |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
|
ex 2004 and
ex 2005
|
Potatoes in the form of flour, meal or flakes, prepared
or preserved otherwise than by vinegar or acetic
acid |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 2006 |
Vegetables, fruit, nuts, fruit-peel and other parts of
plants, preserved by sugar (drained, glacé or
crystallized) |
Manufacture in which the value of any materials of
Chapter 17 used does not exceed 30% of the ex-works price of
the product |
|
| 2007 |
Jams,
fruit jellies, marmalades, fruit or nut purée and fruit or
nut pastes, being cooked preparations, whether or not
containing added sugar or other sweetening matter |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
| ex
2008 |
-
Nuts, not containing added sugar or spirits |
Manufacture in which the value of the originating nuts
and oil seeds of heading Nos 0801, 0802 and 1202 to 1207 used
exceeds 60% of the ex-works price of the product |
|
| |
-
Peanut butter; mixtures based on cereals; palm hearts; maize
(corn) |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| |
-
Other except for fruit and nuts cooked otherwise than by
steaming or boiling in water, not containing added sugar,
frozen |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
|
2009
|
Fruit juices and vegetable juices (including
grape must), unfermented and not containing added spirit,
whether or not containing added sugar or other sweetening
matter
|
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
| ex Chapter
21 |
Miscellaneous edible preparations; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 2101 |
Extracts, essences and concentrates, of coffee, tea,
maté, roasted chicory and other coffee
substitutes |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- all the chicory used must be wholly
obtained
|
|
| 2103 |
Sauces and preparations therefor; mixed condiments and
mixed seasonings; mustard flour and meal and prepared
mustard: |
|
|
| |
-
Sauces and preparations therefor; mixed condiments and mixed
seasonings |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, mustard flour or meal or prepared mustard may be
used |
|
| |
-
Mustard flour and meal and prepared mustard |
Manufacture from materials of any heading |
|
| ex
2104 |
Soups
and broths and preparations therefor |
Manufacture from materials of any heading except prepared
or preserved vegetables of heading Nos 2002 to
2005 |
|
| 2106 |
Food
preparations not elsewhere specified or included |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product
|
|
| ex Chapter
22 |
Beverages, spirits and vinegar; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- all the grapes or any material derived
from grapes used must be wholly obtained
|
|
| 2202 |
Waters, including mineral waters and aerated waters,
containing added sugar or other sweetening matter or
flavoured, and other non-alcoholic beverages, not including
fruit or vegetable juices of heading No 2009 |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of any materials of Chapter
17 used does not exceed 30% of the ex-works price of the
product;
- any fruit juice used (except for
pineapple, lime and grapefruit juices) must already be
originating
|
|
| 2208 |
Undenatured ethyl alcohol of an alcoholic strength by
volume of less than 80% vol; spirits, liqueurs and other
spirituous beverages |
Manufacture:
- from materials not classified within
heading Nos 2207 or 2208;
- in which all the grapes or any material
derived from grapes used must be wholly obtained or if all
the other materials used are already originating, arrack
may be used up to a limit of 5% by volume
|
|
| ex Chapter
23 |
Residues and waste from the food industries; prepared
animal fodder; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
|
ex 2301
|
Whale
meal; flours, meals and pellets of fish or of crustaceans,
molluscs or other aquatic invertebrates, unfit for human
consumption |
Manufacture in which all the materials of Chapters 2 and
3 used must be wholly obtained |
|
| ex
2303 |
Residues from the manufacture of starch from maize
(excluding concentrated steeping liquors), of a protein
content, calculated on the dry product, exceeding 40% by
weight |
Manufacture in which all the maize used must be wholly
obtained |
|
| ex
2306 |
Oil
cake and other solid residues resulting from the extraction
of olive oil, containing more than 3% of olive
oil |
Manufacture in which all the olives used must be wholly
obtained |
|
|
2309
|
Preparations of a kind used in animal feeding |
Manufacture in which:
- all the cereals, sugar or molasses,
meat or milk used must already be originating;
- all the materials of Chapter 3 used
must be wholly obtained
|
|
| ex Chapter
24 |
Tobacco and manufactured tobacco substitutes; except
for: |
Manufacture in which all the materials of Chapter 24 used
must be wholly obtained |
|
| 2402 |
Cigars, cheroots, cigarillos and cigarettes, of tobacco
or of tobacco substitutes |
Manufacture in which at least 70% by weight of the
unmanufactured tobacco or tobacco refuse of heading No 2401
used must already be originating |
|
| ex
2403 |
Smoking tobacco |
Manufacture in which at least 70% by weight of the
unmanufactured tobacco or tobacco refuse of heading No 2401
used must already be originating |
|
| ex Chapter
25 |
Salt;
sulphur; earths and stone; plastering materials; lime and
cement; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
2504 |
Natural crystalline graphite, with enriched carbon
content, purified and ground |
Enriching of the carbon content, purifying and grinding
of crude crystalline graphite |
|
| ex
2515 |
Marble, merely cut by sawing or otherwise into blocks or
slabs of a rectangular (including square) shape, of a
thickness not exceeding 25 cm |
Cutting, by sawing or otherwise, of marble (even if
already sawn) of a thickness exceeding 25 cm |
|
| ex
2516 |
Granite, porphyry, basalt, sandstone and other monumental
and building stone, merely cut by sawing or otherwise, into
blocks or slabs of a rectangular (including square) shape, of
a thickness not exceeding 25 cm |
Cutting, by sawing or otherwise, of stone (even if
already sawn) of a thickness exceeding 25 cm |
|
| ex
2518 |
Calcined dolomite |
Calcination of dolomite not calcined |
|
| ex
2519 |
Crushed natural magnesium carbonate (magnesite), in
hermetically sealed containers, and magnesium oxide, whether
or not pure, other than fused magnesia or dead-burned
(sintered) magnesia |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, natural magnesium carbonate (magnesite) may be
used |
|
| ex
2520 |
Plasters specially prepared for dentistry |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| ex
2524 |
Natural asbestos fibres |
Manufacture from asbestos concentrate |
|
| ex
2525 |
Mica
powder |
Grinding of mica or mica waste |
|
| ex
2530 |
Earth
colours, calcined or powdered |
Calcination or grinding of earth colours |
|
| Chapter
26 |
Ores,
slag and ash |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
27 |
Mineral fuels, mineral oils and products of their
distillation; bituminous substances; mineral waxes; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
2707 |
Oils
in which the weight of the aromatic constituents exceeds that
of the non-aromatic constituents, being oils similar to
mineral oils obtained by distillation of high temperature
coal tar, of which more than 65% by volume distils at a
temperature of up to 250°C (including mixtures of petroleum
spirit and benzole), for use as power or heating
fuels |
Operations of refining and/or one or more
specific process(es)1
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| ex
2709 |
Crude
oils obtained from bituminous minerals |
Destructive distillation of bituminous
materials |
|
| 2710 |
Petroleum oils and oils obtained from bituminous
materials, other than crude; preparations not elsewhere
specified or included, containing by weight 70% or more of
petroleum oils or of oils obtained from bituminous materials,
these oils being the basic constituents of the
preparations |
Operations of refining and/or one or more
specific process(es)2
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| 2711 |
Petroleum gases and other gaseous
hydrocarbons |
Operations of refining and/or one or more
specific process(es)1
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| 2712 |
Petroleum jelly; paraffin wax, microcrystalline petroleum
wax, slack wax, ozokerite, lignite wax, peat wax, other
mineral waxes and similar products obtained by synthesis or
by other processes, whether or not coloured |
Operations of refining and/or one or more
specific process(es)1
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| 2713 |
Petroleum coke, petroleum bitumen and other residues of
petroleum oils or of oils obtained from bituminous
materials |
Operations of refining and/or one or more
specific process(es)2
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| 2714 |
Bitumen and asphalt, natural; bituminous or oil shale and
tar sands; asphaltites and asphaltic rocks |
Operations of refining and/or one or more
specific process(es)1
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| 2715 |
Bituminous mixtures based on natural asphalt, on natural
bitumen, on petroleum bitumen, on mineral tar or on mineral
tar pitch |
Operations of refining and/or one or more
specific process(es)1
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| ex Chapter
28 |
Inorganic chemicals; organic or inorganic compounds or
precious metals, of rare-earth metals, of radioactive
elements or of isotopes; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
2805 |
"Mischmetall" |
Manufacture by electrolytic or thermal treatment in which
the value of all the materials used does not exceed 50% of
the ex-works price of the product |
|
| ex
2811 |
Sulphur trioxide |
Manufacture from sulphur dioxide
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
2833 |
Aluminium sulphate |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| ex
2840 |
Sodium perborate |
Manufacture from disodium tetraborate
pentahydrate
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
29 |
Organic chemicals; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
2901 |
Acyclic hydrocarbons for use as power or heating
fuels |
Operations of refining and/or one or more
specific process(es)1
or
|
|
| |
|
Other
operations in which all the materials used are classified
within a heading other than that of the product. However,
materials classified within the same heading may be used
provided their value does not exceed 50% of the ex-works
price of the product |
|
| ex
2902 |
Cyclanes and cyclenes (other than azulenes), benzene,
toluene, xylenes, for use as power or heating
fuels |
Operations of refining and/or one or more
specific process(es)1
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used, provided their value does not
exceed 50% of the ex-works price of the product
|
|
| ex
2905 |
Metal
alcoholates of alcohols of this heading and of ethanol or
glycerol |
Manufacture from materials of any heading, including
other materials of heading No 2905. However, metal
alcoholates of this heading may be used, provided their value
does not exceed 20% of the ex-works price of the
product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 2915 |
Saturated acyclic monocarboxylic acids and their
anhydrides, halides, peroxides and peroxyacids; their
halogenated, sulphonated, nitrated or nitrosated
derivatives |
Manufacture from materials of any heading. However, the
value of all the materials of headings Nos 2915 and 2916 used
may not exceed 20% of the ex-works price of the
product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
2932 |
- Internal ethers and their halogenated,
sulphonated, nitrated or nitrosated derivatives
- Cyclic acetals and internal hemiacetals
and their halogenated, sulphonated, nitrated or nitrosated
derivatives
|
Manufacture from materials of any heading.
However, the value of all the materials of heading No 2909
used may not exceed 20% of the ex-works price of the
product
Manufacture from materials of any
heading
|
Manufacture in which the value of all the
materials used does not exceed 40% of the ex-works price of
the product
Manufacture in which the value of all the
materials used does not exceed 40% of the ex-works price of
the product
|
| 2933 |
Heterocyclic compounds with nitrogen hetero-atom(s)
only |
Manufacture from materials of any heading. However, the
value of all the materials of headings Nos 2932 and 2933 used
may not exceed 20% of the ex-works price of the
product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 2934 |
Nucleic acids and their salts; other heterocyclic
compounds |
Manufacture from materials of any heading. However, the
value of all the materials of headings Nos 2932, 2933 and
2934 used may not exceed 20% of the ex-works price of the
product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
30 |
Pharmaceutical products; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
|
| 3002 |
Human
blood; animal blood prepared for therapeutic, prophylactic or
diagnostic uses; antisera and other blood fractions and
modified immunological products whether or not obtained by
means of biotechnological processes; vaccines, toxins,
cultures of micro-organisms (excluding yeasts) and similar
products: |
|
|
| |
-
Products consisting of two or more constituents which have
been mixed together for therapeutic or prophylactic uses or
unmixed products for these uses, put up in measured doses or
in forms or packings for retail sale |
Manufacture from materials of any heading, including
other materials of heading No 3002. The materials of this
description may also be used, provided their value does not
exceed 20% of the ex-works price of the product |
|
| |
-
Other: |
|
|
| |
--
human blood |
Manufacture from materials of any heading, including
other materials of heading No 3002. The materials of this
description may also be used, provided their value does not
exceed 20% of the ex-works price of the product |
|
| |
--
animal blood prepared for therapeutic or prophylactic
uses |
Manufacture from materials of any heading, including
other materials of heading No 3002. The materials of this
description may also be used, provided their value does not
exceed 20% of the ex-works price of the product |
|
| |
--
blood fractions other than antisera, haemoglobin and serum
globulin |
Manufacture from materials of any heading, including
other materials of heading No 3002. The materials of this
description may also be used, provided their value does not
exceed 20% of the ex-works price of the product |
|
| |
--
haemoglobin, blood globulin and serum globulin |
Manufacture from materials of any heading, including
other materials of heading No 3002. The materials of this
description may also be used, provided their value does not
exceed 20% of the ex-works price of the product |
|
| |
--
other |
Manufacture from materials of any heading, including
other materials of heading No 3002. The materials of this
description may also be used, provided their value does not
exceed 20% of the ex-works price of the product |
|
| 3003 and
3004 |
Medicaments (excluding goods of heading Nos 3002, 3005 or
3006): |
|
|
| |
- Obtained from amikacin of heading No
2941
- Other
|
Manufacture in which all the materials used
are classified within a heading other than that of the
product. However, materials of heading No 3003 or 3004 may
be used provided their value, taken together, does not
exceed 20 % of the ex works price of the product
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product. However,
materials of heading No 3003 or 3004 may be used provided
their value, taken together, does not exceed 20% of the
ex-works price of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| ex Chapter
31 |
Fertilizers; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3105 |
Mineral or chemical fertilizers containing
two or three of the fertilizing elements nitrogen,
phosphorous and potassium; other fertilizers; goods of this
Chapter, in tablets or similar forms or in packages of a
gross weight not exceeding 10 kg, except for:
- sodium nitrate
- calcium cyanamide
- potassium sulphate
- magnesium potassium sulphate
|
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product. However,
materials classified within the same heading may be used
provided their value does not exceed 20% of the ex-works
price of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
32 |
Tanning or dyeing extracts; tannins and their
derivatives; dyes, pigments and other colouring matter;
paints and varnishes; putty and other mastics; inks; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3201 |
Tannins and their salts, esters, ethers, and other
derivatives |
Manufacture from tanning extracts of vegetable
origin |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 3205 |
Colour lakes; preparations as specified in Note 3 to this
Chapter based on colour lakes1 |
Manufacture from materials of any heading, except
headings Nos 3203, 3204 and 3205. However, materials from
heading No 3205 may be used provided their value does not
exceed 20% of the ex-works price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
33 |
Essential oils and resinoids; perfumery, cosmetic or
toilet preparations; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 3301 |
Essential oils (terpeneless or not), including concretes
and absolutes; resinoids; extracted oleoresins; concentrates
of essential oils in fats, in fixed oils, in waxes or the
like, obtained by enfleurage or maceration; terpenic
by-products of the deterpenation of essential oils; aqueous
distillates and aqueous solutions of essential
oils |
Manufacture from materials of any heading, including
materials of a different "group"2 in this heading.
However, materials of the same group may be used, provided
their value does not exceed 20% of the ex-works price of the
product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
34 |
Soap,
organic surface-active agents, washing preparations,
lubricating preparations, artificial waxes, prepared waxes,
polishing or scouring preparations, candles and similar
articles, modelling pastes, "dental waxes" and
dental preparations with a basis of plaster; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3403 |
Lubricating preparations containing petroleum oils or
oils obtained from bituminous minerals, provided they
represent less than 70% by weight |
Operations of refining and/or one or more
specific process(es)1
or
Other operations in which all the
materials used are classified within a heading other than
that of the product. However, materials classified within
the same heading may be used provided their value does not
exceed 50% of the ex-works price of the product
|
|
| 3404 |
Artificial waxes and prepared waxes:
- With a basis of paraffin, petroleum
waxes, waxes obtained from bituminous minerals, slack wax
or scale wax
|
Manufacture in which all the materials
used are classified within a heading other than that of the
product. However, materials classified within the same
heading may be used provided their value does not exceed
50% of the ex-works price of the product
|
|
| |
-
Other |
Manufacture from materials of any heading,
except:
- hydrogenated oils having the character
of waxes of heading No 1516;
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| |
|
-
fatty acids not chemically defined or industrial fatty
alcohols having the character of waxes of heading No
3823; |
|
| |
|
-
materials of heading No 3404 |
|
| |
|
However, these materials may be used provided their value
does not exceed 20% of the ex-works price of the
product |
|
| ex Chapter
35 |
Albuminoidal substances; modified starches; glues;
enzymes; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 3505 |
Dextrins and other modified starches (for example,
pregelatinized or esterified starches); glues based on
starches, or on dextrins or other modified
starches: |
|
|
| |
-
Starch ethers and esters |
Manufacture from materials of any heading, including
other materials of heading No 3505 |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| |
-
Other |
Manufacture from materials of any heading,
except those of heading No 1108
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3507 |
Prepared enzymes not elsewhere specified or
included |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| Chapter
36 |
Explosives; pyrotechnic products; matches; pyrophoric
alloys; certain combustible preparations |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
37 |
Photographic or cinematographic goods; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 3701 |
Photographic plates and film in the flat, sensitized,
unexposed, of any material other than paper, paperboard or
textiles; instant print film in the flat, sensitized,
unexposed, whether or not in packs: |
|
|
| |
-
Instant print film for colour photography, in
packs |
Manufacture in which all the materials used are
classified within a heading other than heading Nos 3701 or
3702. However, materials from heading No 3702 may be used
provided their value does not exceed 30% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| |
-
Other |
Manufacture in which all the materials used are
classified within a heading other than heading No 3701 or
3702. However, materials from heading Nos 3701 and 3702 may
be used provided their value taken together, does not exceed
20% of the ex-works price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 3702 |
Photographic film in rolls, sensitized, unexposed, of any
material other than paper, paperboard or textiles; instant
print film in rolls, sensitized, unexposed |
Manufacture in which all the materials used are
classified within a heading other than heading Nos 3701 or
3702 |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 3704 |
Photographic plates, film paper, paperboard and textiles,
exposed but not developed |
Manufacture in which all the materials used are
classified within a heading other than heading Nos 3701 to
3704 |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
38 |
Miscellaneous chemical products; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3801 |
-
Colloidal graphite in suspension in oil and semi-colloidal
graphite; carbonaceous pastes for electrodes |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| |
-
Graphite in paste form, being a mixture of more than 30% by
weight of graphite with mineral oils |
Manufacture in which the value of all the materials of
heading No 3403 used does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3803 |
Refined tall oil |
Refining of crude tall oil
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3805 |
Spirits of sulphate turpentine, purified |
Purification by distillation or refining of
raw spirits of sulphate turpentine
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3806 |
Ester
gums |
Manufacture from resin acids |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
3807 |
Wood
pitch (wood tar pitch) |
Distillation of wood tar
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 3808 |
Insecticides, rodenticides, fungicides, herbicides,
anti-sprouting products and plant-growth regulators,
disinfectants and similar products, put up in forms of
packings for retail sale or as preparations or articles (for
example, sulphur-treated bands, wicks and candles, and
fly-papers) |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
products |
|
| 3809 |
Finishing agents, dye carriers to accelerate the dyeing
or fixing of dyestuffs and other products and preparations
(for example, dressings and mordants), of a kind used in the
textile, paper, leather or like industries, not elsewhere
specified or included |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
products |
|
| 3810 |
Pickling preparations for metal surfaces; fluxes and
other auxiliary preparations for soldering, brazing or
welding; soldering, brazing or welding powders and pastes
consisting of metal and other materials; preparations of a
kind used as cores or coatings for welding electrodes or
rods |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
products |
|
| 3811 |
Anti-knock preparations, oxidation inhibitors, gum
inhibitors, viscosity improvers, anti-corrosive preparations
and other prepared additives, for mineral oils (including
gasoline) or for other liquids used for the same purposes as
mineral oils: |
|
|
| |
-
Prepared additives for lubricating oil, containing petroleum
oils or oils obtained from bituminous minerals |
Manufacture in which the value of all the materials of
heading No 3811 used does not exceed 50% of the ex-works
price of the product |
|
| |
-
Other |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3812 |
Prepared rubber accelerators; compound plasticizers for
rubber or plastics, not elsewhere specified or included;
anti-oxidizing preparations and other compound stabilizers
for rubber or plastics |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3813 |
Preparations and charges for fire-extinguishers; charged
fire-extinguishing grenades |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3814 |
Organic composite solvents and thinners, not elsewhere
specified or included; prepared paint or vanish
removers |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3818 |
Chemical elements doped for use in electronics, in the
form of discs, wafers or similar forms; chemical compounds
doped for use in electronics |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3819 |
Hydraulic brake fluids and other prepared liquids for
hydraulic transmission, not containing or containing less
than 70% by weight of petroleum oils or oils obtained from
bituminous minerals |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3820 |
Anti-freezing preparations and prepared de-icing
fluids |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3822 |
Diagnostic or laboratory reagents on a backing and
prepared diagnostic or laboratory reagents, whether or not on
a backing, other than those of heading No. 3002 or
3006 |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3823 |
Industrial monocarboxylic fatty acids; acid oils from
refining; industrial fatty alcohols. |
|
|
| |
-
Industrial monocarboxylic fatty acids, acid oils from
refining |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| |
-
Industrial fatty alcohols |
Manufacture from materials of any heading including other
materials of heading No. 3823 |
|
| 3824 |
Prepared binders for foundry moulds or cores; chemical
products and preparations of the chemical or allied
industries (including those consisting of mixtures of natural
products), not elsewhere specified or included; residual
products of the chemical or allied industries, not elsewhere
specified or included: |
|
|
| |
- The following of this heading:
Prepared binders for foundry moulds or
cores based on natural resinous products
Naphthenic acids, their water insoluble
salts and their esters
Sorbitol other than that of heading No
2905
|
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 20% of the ex-works
price of the product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| |
Petroleum sulphonates, excluding petroleum
sulphonates of alkali metals, of ammonium or of
ethanolamines; thiophenated sulphonic acids of oils
obtained from bituminous minerals, and their salts
Ion exchangers
Getters for vacuum tubes
|
|
|
| |
Alkaline iron oxide for the purification of
gas
Ammoniacal gas liquors and spent oxide
produced in coal gas purification
Sulphonaphthenic acids, their water
insoluble salts and their esters
Fusel oil and Dippel's oil
Mixtures of salts having different
anions
Copying pastes with a basis of gelatin,
whether or not on a paper or textile backing
|
|
|
| |
-
Other |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 3901 to
3915 |
Plastics in primary forms, waste, parings and scrap, of
plastic; except for heading Nos ex 3907 and 3912 for which
the rules are set out below: |
|
|
| |
-
Addition homopolymerization products in which a single
monomer contributes more than 99% by weight to the total
polymer content |
Manufacture in which:
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product;
- the value of any materials of Chapter
39 used does not exceed 20% of the ex-works price of the
product1
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| |
-
Other |
Manufacture in which the value of the materials of
Chapter 39 used does not exceed 20% of the ex-works price of
the product1 |
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| ex
3907 |
-
Copolymer, made from polycarbonate and
acrylonitrile-butadiene-styrene copolymer (ABS) |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, materials classified within the same heading may be
used provided their value does not exceed 50% of the ex-works
price of the product1 |
|
| |
-
Polyester |
Manufacture in which the value of any materials of
Chapter 39 used does not exceed 20% of the ex-works price of
the product and/or manufacture from polycarbonate of
tetrabromo-(bisphenol A) |
|
| 3912 |
Cellulose and its chemical derivatives, not elsewhere
specified or included, in primary forms |
Manufacture in which the value of any materials
classified in the same heading as the product does not exceed
20% of the ex-works price of the product |
|
| 3916 to
3921 |
Semi-manufactures and articles of plastics; except for
headings Nos ex 3916, ex 3917, ex 3920 and ex 3921, for which
the rules are set out below: |
|
|
| |
- Flat products, further worked than only
surface-worked or cut into forms other than rectangular
(including square); other products, further worked than
only surface-worked
- Other:
|
Manufacture in which the value of any materials of
Chapter 39 used does not exceed 50% of the ex-works price of
the product |
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| |
--
Addition homopolymerization products in which a single
monomer contributes more than 99% by weight to the total
polymer content |
Manufacture in which:
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product;
- the value of any materials of Chapter
39 used does not exceed 20% of the ex-works price of the
product1
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| |
--
Other |
Manufacture in which the value of any materials of
Chapter 39 used does not exceed 20% of the ex-works price of
the product1 |
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| ex 3916 and ex
3917 |
Profile shapes and tubes |
Manufacture in which:
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product;
- the value of any materials classified
within the same heading as the product does not exceed 20%
of the ex-works price of the product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| ex
3920 |
-
Ionomer sheet or film |
Manufacture from a thermoplastic partial salt which is a
copolymer of ethylene and metacrylic acid partly neutralized
with metal ions, mainly zinc and sodium |
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| |
-
Sheets of regenerated cellulose, polyamides or
polyethylene |
Manufacture in which the value of any materials
classified in the same heading as the product does not exceed
20% of the ex-works price of the product |
|
| ex
3921 |
Foils
of plastic, metallized |
Manufacture from highly transparent polyester foils with
a thickness of less than 23 micron1 |
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 3922 to
3926 |
Articles of plastics |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| ex Chapter
40 |
Rubber and articles thereof; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
4001 |
Laminated slabs or crepe rubber for shoes |
Lamination of sheets of natural rubber |
|
| 4005 |
Compound rubber, unvulcanized, in primary forms or in
plates, sheets or strip |
Manufacture in which the value of all the materials used,
except natural rubber, does not exceed 50% of the ex-works
price of the product |
|
| 4012 |
Retreaded or used pneumatic tyres of rubber; solid or
cushion tyres, interchangeable tyre treads and tyre flaps, of
rubber: |
|
|
| |
-
Retreaded pneumatic, solid or cushion tyres, of
rubber |
Retreading of used tyres |
|
| |
-
Other |
Manufacture from materials of any heading, except those
of heading Nos 4011 or 4012 |
|
| ex
4017 |
Articles of hard rubber |
Manufacture from hard rubber |
|
| ex Chapter
41 |
Raw
hides and skins (other than furskins) and leather; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
4102 |
Raw
skins of sheep or lambs, without wool on |
Removal of wool from sheep or lamb skins, with wool
on |
|
| 4104 to
4107 |
Leather, without hair or wool, other than leather of
heading Nos 4108 or 4109 |
Retanning of pre-tanned leather
or
Manufacture in which all the materials
used are classified within a heading other than that of the
product
|
|
| 4109 |
Patent leather and patent laminated leather; metallized
leather |
Manufacture from leather of heading Nos 4104 to 4107
provided its value does not exceed 50% of the ex-works price
of the product |
|
| Chapter
42 |
Articles of leather; saddlery and harness; travel goods,
handbags and similar containers; articles of animal gut
(other than silk worm gut) |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
43 |
Furskins and artificial fur; manufactures thereof; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
4302 |
Tanned or dressed furskins, assembled: |
|
|
| |
-
Plates, crosses and similar forms |
Bleaching or dyeing, in addition to cutting and assembly
of non-assembled tanned or dressed furskins |
|
| |
-
Other |
Manufacture from non-assembled, tanned or dressed
furskins |
|
| 4303 |
Articles of apparel, clothing accessories and other
articles of furskin |
Manufacture from non-assembled tanned or dressed furskins
of heading No 4302 |
|
| ex Chapter
44 |
Wood
and articles of wood; wood charcoal; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
4403 |
Wood
roughly squared |
Manufacture from wood in the rough, whether or not
stripped of its bark or merely roughed down |
|
| ex
4407 |
Wood
sawn or chipped lengthwise, sliced or peeled, of a thickness
exceeding 6 mm, planed, sanded or finger-jointed |
Planing, sanding or finger-jointing |
|
| ex
4408 |
Veneer sheets and sheets for plywood, of a thickness not
exceeding 6 mm, spliced, and other wood sawn lengthwise,
sliced or peeled of a thickness not exceeding 6 mm, planed,
sanded or finger-jointed |
Splicing, planing, sanding or finger-jointing |
|
| ex
4409 |
Wood continuously shaped along any of its
edges or faces, whether or not planed, sanded or
finger-jointed:
- Sanded or fingerjointed
|
Sanding or fingerjointing
|
|
| |
-
Beadings and mouldings |
Beading or moulding |
|
|
ex 4410 to
ex 4413
|
Beadings and mouldings, including moulded skirting and
other moulded boards |
Beading or moulding |
|
| ex
4415 |
Packing cases, boxes, crates, drums and similar packings,
of wood |
Manufacture from boards not cut to size |
|
| ex
4416 |
Casks, barrels, vats, tubs and other coopers' products
and parts thereof, of wood |
Manufacture from riven staves, not further worked than
sawn on the two principal surfaces |
|
| ex
4418 |
-
Builders' joinery and carpentry of wood |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, cellular wood panels, shingles and shakes may be
used |
|
| |
-
Beadings and mouldings |
Beading or moulding |
|
| ex
4421 |
Match
splints; wooden pegs or pins for footwear |
Manufacture from wood of any heading except drawn wood of
heading No 4409 |
|
| ex Chapter
45 |
Cork
and articles of cork; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 4503 |
Articles of natural cork |
Manufacture from cork of heading No 4501 |
|
| Chapter
46 |
Manufactures of straw, of esparto or of other plaiting
materials; basketware and wickerwork |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| Chapter
47 |
Pulp
of wood or of other fibrous cellulosic material; recovered
(waste and scrap) paper or paperboard |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
48 |
Paper
and paperboard; articles of paper pulp, of paper or of
paperboard; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
4811 |
Paper
and paperboard, ruled, lined or squared only |
Manufacture from paper-making materials of Chapter
47 |
|
| 4816 |
Carbon paper, self-copy paper and other copying or
transfer papers (other than those of heading No 4809),
duplicator stencils and offset plates, of paper, whether or
not put up in boxes |
Manufacture from paper-making materials of Chapter
47 |
|
| 4817 |
Envelopes, letter cards, plain postcards and
correspondence cards, of paper or paperboard; boxes, pouches,
wallets and writing compendiums, of paper or paperboard,
containing an assortment of paper stationery |
Manufacturing in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| ex
4818 |
Toilet paper |
Manufacture from paper-making materials of Chapter
47 |
|
| ex
4819 |
Cartons, boxes, cases, bags and other packing containers,
of paper, paperboard, cellulose wadding or webs of cellulose
fibres |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| ex
4820 |
Letter pads |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| ex
4823 |
Other
paper, paperboard, cellulose wadding and webs of cellulose
fibres, cut to size or shape |
Manufacture from paper-making materials of Chapter
47 |
|
| ex Chapter
49 |
Printed books, newspapers, pictures and other products of
the printing industry; manuscripts, typescripts and plans;
except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 4909 |
Printed or illustrated postcards; printed cards bearing
personal greetings, messages or announcements, whether or not
illustrated, with or without envelopes or
trimmings |
Manufacture from materials not classified within heading
Nos 4909 or 4911 |
|
| 4910 |
Calendars of any kind, printed, including calendar
blocks: |
|
|
| |
-
Calendars of the "perpetual" type or with
replaceable blocks mounted on bases other than paper or
paperboard |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| |
-
Other |
Manufacture from materials not classified in heading Nos
4909 or 4911 |
|
| ex Chapter
50 |
Silk;
except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
5003 |
Silk
waste (including cocoons unsuitable for reeling, yarn waste
and garnetted stock), carded or combed |
Carding or combing of silk waste |
|
| 5004 to ex
5006 |
Silk
yarn and yarn spun from silk waste |
Manufacture from1 :
- raw silk or silk waste carded or combed
or otherwise prepared for spinning,
- other natural fibres not carded or
combed or otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5007 |
Woven
fabrics of silk or of silk waste: |
|
|
| |
-
Incorporating rubber thread |
Manufacture from single yarn1 |
|
| |
-
Other |
Manufacture from1: |
|
| |
|
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper
or
|
|
| |
|
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerizing, heat setting, raising, calendering, shrink
resistance processing, permanent finishing, decatizing,
impregnating, mending and burling) where the value of the
unprinted fabric used does not exceed 47.5% of the ex-works
price of the product |
|
| ex Chapter
51 |
Wool,
fine or coarse animal hair; horsehair yarn and woven fabric;
except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 5106 to
5110 |
Yarn
of wool, of fine or coarse animal hair or of
horsehair |
Manufacture from1 :
- raw silk or silk waste carded or combed
or otherwise prepared for spinning,
- natural fibres not carded or combed or
otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5111 to
5113 |
Woven
fabrics of wool, of fine or coarse animal hair or of
horsehair: |
|
|
| |
-
Incorporating rubber thread |
Manufacture from single yarn1 |
|
| |
-
Other |
Manufacture from1: |
|
| |
|
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper
|
|
| |
|
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerizing, heat setting, raising, calendering,
shrink resistance processing, permanent finishing,
decatizing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| ex Chapter
52 |
Cotton; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 5204 to
5207 |
Yarn
and thread of cotton |
Manufacture from1:
- raw silk or silk waste carded or combed
or otherwise prepared for spinning,
- natural fibres not carded or combed or
otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5208 to
5212 |
Woven
fabrics of cotton: |
|
|
| |
-
Incorporating rubber thread |
Manufacture from single yarn1 |
|
| |
-
Other |
Manufacture from1: |
|
| |
|
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper
|
|
| |
|
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerizing, heat setting, raising, calendering,
shrink resistance processing, permanent finishing,
decatizing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| ex Chapter
53 |
Other
vegetable textile fibres; paper yarn and woven fabrics of
paper yarn; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 5306 to
5308 |
Yarn
of other vegetable textile fibres; paper yarn |
Manufacture from1:
- raw silk or silk waste carded or combed
or otherwise prepared for spinning,
- natural fibres not carded or combed or
otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5309 to
5311 |
Woven
fabrics of other vegetable textile fibres; woven fabrics of
paper yarn: |
|
|
| |
-
Incorporating rubber thread |
Manufacture from single yarn1 |
|
| |
-
Other |
Manufacture from1:
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper
|
|
| |
|
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerizing, heat setting, raising, calendering,
shrink resistance processing, permanent finishing,
decatizing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| 5401 to
5406 |
Yarn,
monofilament and thread of man-made filaments |
Manufacture from1:
- raw silk or silk waste carded or combed
or otherwise prepared for spinning,
- natural fibres not carded or combed or
otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5407 and
5408 |
Woven
fabrics of man-made filament yarn: |
|
|
| |
-
Incorporating rubber thread |
Manufacture from single yarn1 |
|
| |
-
Other |
Manufacture from1: |
|
| |
|
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper
|
|
| |
|
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerizing, heat setting, raising, calendering,
shrink resistance processing, permanent finishing,
decatizing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| 5501 to
5507 |
Man-made staple fibres |
Manufacture from chemical materials or textile
pulp |
|
| 5508 to
5511 |
Yarn
and sewing thread of man-made staple fibres |
Manufacture from1:
- raw silk or silk waste carded or combed
or otherwise prepared for spinning,
- natural fibres not carded or combed or
otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5512 to
5516 |
Woven
fabrics of man-made staple fibres: |
|
|
| |
-
Incorporating rubber thread |
Manufacture from single yarn1 |
|
| |
-
Other |
Manufacture from1 :
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise prepared for spinning,
- chemical materials or textile pulp,
or
- paper
|
|
| |
|
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerizing, heat setting, raising, calendering,
shrink resistance processing, permanent finishing,
decatising, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| ex Chapter
56 |
Wadding, felt and non-wovens; special yarns; twine,
cordage, ropes and cables and articles thereof; except
for: |
Manufacture from1 :
- coir yarn,
- natural fibres,
- chemical materials or textile pulp,
or
- paper making materials
|
|
| 5602 |
Felt,
whether or not impregnated, coated, covered or
laminated: |
|
|
| |
-
Needleloom felt |
Manufacture from 1:
- natural fibres,
- chemical materials or textile
pulp
|
|
| |
|
However:
- polypropylene filament of heading No
5402,
- polypropylene fibres of heading No 5503
or 5506 or
- polypropylene filament tow of heading
No 5501, of which the denomination in all cases of a single
filament or fibre is less than 9 decitex may be used
provided their value does not exceed 40% of the ex-works
price of the product
|
|
| |
-
Other |
Manufacture from1:
- natural fibres,
- man-made staple fibres made from
casein, or
- chemical materials or textile
pulp
|
|
| 5604 |
Rubber thread and cord, textile covered; textile yarn,
and strip and the like of heading No 5404 or 5405,
impregnated, coated, covered or sheathed with rubber or
plastics: |
|
|
| |
-
Rubber thread and cord, textile covered |
Manufacture from rubber thread or cord, not textile
covered |
|
| |
-
Other |
Manufacture from1:
- natural fibres not carded or combed or
otherwise processed for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5605 |
Metallized yarn, whether or not gimped, being textile
yarn, or strip or the like of heading No 5404 or 5405,
combined with metal in the form of thread, strip or powder or
covered with metal |
Manufacture from1 :
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| 5606 |
Gimped yarn, and strip and the like of heading No 5404 or
5405 , gimped (other than those of heading No 5605 and gimped
horsehair yarn); chenille yarn (including flock chenille
yarn); loop wale-yarn |
Manufacture from1:
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning,
- chemical materials or textile pulp,
or
- paper-making materials
|
|
| Chapter
57 |
Carpets and other textile floor coverings: |
|
|
| |
- Of
needleloom felt |
Manufacture from1:
- natural fibres, or
- chemical materials or textile
pulp
However:
|
|
| |
|
- polypropylene filament of heading No
5402,
- polypropylene fibres of heading No 5503
or 5506 or
- polypropylene filament tow of heading
No 5501, of which the denomination in all cases of a single
filament or fibre is less than 9 decitex may be used
provided their value does not exceed 40% of the ex-works
price of the product
|
|
| |
- Of
other felt |
Manufacture from1:
- natural fibres not carded or combed or
otherwise processed for spinning, or
- chemical materials or textile
pulp
|
|
| |
-
Other |
Manufacture from1:
- coir yarn,
- synthetic or artificial filament
yarn,
- natural fibres, or
- man-made staple fibres not carded or
combed or otherwise processed for spinning
|
|
| ex Chapter
58 |
Special woven fabrics; tufted textile fabrics; lace;
tapestries; trimmings; embroidery; except for: |
|
|
| |
-
Combined with rubber thread |
Manufacture from single yarn1 |
|
| |
-
Other |
Manufacture from1: |
|
| |
|
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp,
|
|
| |
|
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerizing, heat setting, raising, calendering,
shrink resistance processing, permanent finishing,
decatizing, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| 5805 |
Hand-woven tapestries of the types gobelins, flanders,
aubusson, beauvais and the like, and needle-worked tapestries
(for example, petit point, cross stitch), whether or not made
up |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 5810 |
Embroidery in the piece, in strips or in
motifs |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 5901 |
Textile fabrics coated with gum or amylaceous substances
of a kind used for the outer covers of books or the like;
tracing cloth; prepared painting canvas; buckram and similar
stiffened textile fabrics of a kind used for hat
foundations |
Manufacture from yarn |
|
| 5902 |
Tyre
cord fabric of high tenacity yarn of nylon or other
polyamides, polyesters or viscose rayon: |
|
|
| |
-
Containing not more than 90 % by weight of textile
materials |
Manufacture from yarn |
|
| |
-
Other |
Manufacture from chemical materials or textile
pulp |
|
| 5903 |
Textile fabrics impregnated, coated, covered or laminated
with plastics, other than those of heading No
5902 |
Manufacture from yarn
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerising, heat setting, rasing, calendering,
shrink resistance processing, permanent finishing,
decatising, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| 5904 |
Linoleum, whether or note cut to shape; floor coverings
consisting of a coating or covering applied on a textile
backing, whether or not cut to shape |
Manufacture from yarn1 |
|
| 5905 |
Textile wall coverings: |
|
|
| |
-
Impregnated, coated, covered or laminated with rubber,
plastics or other materials |
Manufacture from yarn |
|
| |
-
Other |
Manufacture from1: |
|
| |
|
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp,
or
|
|
| |
|
Printing accompanied by at least two preparatory or
finishing operations (such as scouring, bleaching,
mercerizing, heat setting, raising, calendering, shrink
resistance processing, permanent finishing, decatizing,
impregnating, mending and burling) where the value of the
unprinted fabric used does not exceed 47.5% of the ex-works
price of the product |
|
| 5906 |
Rubberized textile fabrics, other than those of heading
No 5902: |
|
|
| |
-
Knitted or crocheted fabrics |
Manufacture from1 :
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp
|
|
| |
-
Other fabrics made of synthetic filament yarn, containing
more than 90% by weight of textile materials |
Manufacture from chemical materials |
|
| |
-
Other |
Manufacture from yarn |
|
| 5907 |
Textile fabrics otherwise impregnated, coated or covered;
painted canvas being theatrical scenery, studio backcloths or
the like |
Manufacture from yarn
or
Printing accompanied by at least two
preparatory or finishing operations (such as scouring,
bleaching, mercerising, heat setting, rasing, calendering,
shrink resistance processing, permanent finishing,
decatising, impregnating, mending and burling) where the
value of the unprinted fabric used does not exceed 47.5% of
the ex-works price of the product
|
|
| 5908 |
Textile wicks, woven, plaited or knitted, for lamps,
stoves, lighters, candles or the like; incandescent gas
mantles and tubular knitted gas mantle fabric therefore,
whether or not impregnated: |
|
|
| |
-
Incandescent gas mantles, impregnated |
Manufacture from tubular knitted gas mantle
fabric |
|
| |
-
Other |
Manufacture in which all the materials used
are classified within a heading other than that of the
product
|
|
| 5909 to
5911 |
Textile articles of a kind suitable for
industrial use:
- Polishing discs or rings other than of
felt of heading No 5911
- Woven fabrics, of a kind commonly used
in papermaking or other technical uses, felted or not,
whether or not impregnated or coated, tubular or endless
with single or multiple warp and/or weft, or flat woven
with multiple warp and/or weft of heading No
5911
|
Manufacture from yarn or waste fabrics or
rags of heading No 6310
Manufacture from:
- coir yarn,
- the following materials:
- yarn of
polytetrafluoro-ethylene,
- yarn, multiple, of polyamide, coated
impregnated or covered with a phenolic resin,
- yarn of synthetic textile fibres of
aromatic polyamides, obtained by polycondensation of
m-phenylenediamine and isophthalic acid,
- monofil of
polytetrafluoroethylene2
- yarn of synthetic textile fibres of
poly-p-phenylene terephthalamide,
- glass fibre yarn, coated with phenol
resin and gimped with acrylic yarn2
- copolyester monofilaments of a
polyester and a resin of terephthalic acid and 1,4
cyclohexanedimethanol and isophthalic acid,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp
|
|
| |
-
Other |
Manufacture from1:
- coir yarn,
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp
|
|
| Chapter
60 |
Knitted or crocheted fabrics |
Manufacture from1:
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp
|
|
| Chapter
61 |
Articles of apparel and clothing accessories, knitted or
crocheted: |
|
|
| |
-
Obtained by sewing together or otherwise assembling, two or
more pieces of knitted or crocheted fabric which have been
either cut to form or obtained directly to form |
Manufacture from yarn1,2 |
|
| |
-
Other |
Manufacture from1 :
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp
|
|
| ex Chapter
62 |
Articles of apparel and clothing accessories, not knitted
or crocheted; except for: |
Manufacture from yarn1,2 |
|
|
ex 6202,
ex 6204,
ex 6206,
ex 6209 and ex 6211
|
Women's, girls' and babies' clothing and clothing
accessories for babies, embroidered |
Manufacture from yarn1
or
Manufacture from unembroidered fabric
provided the value of the unembroidered fabric used does
not exceed 40% of the ex-works price of the
product1
|
|
|
ex 6210 and
ex 6216
|
Fire-resistant equipment of fabric covered
with foil of aluminized polyester
|
Manufacture from yarn1
or
Manufacture from uncoated fabric provided
the value of the uncoated fabric used does not exceed 40%
of the ex-works price of the product1
|
|
|
6213 and
6214
|
Handkerchiefs, shawls, scarves, mufflers, mantillas,
veils and the like: |
|
|
| |
-
Embroidered |
Manufacture from unbleached single
yarn1,2
or
Manufacture from unembroidered fabric
provided the value of the unembroidered fabric used does
not exceed 40% of the ex-works price of the
product1
|
|
| |
-
Other |
Manufacture from unbleached single
yarn1,2
or
Making up followed by printing
accompanied by at least two preparatory or finishing
operations (such as scouring, bleaching, mercerizing, heat
setting, raising, calendering, shrink resistance
processing, permanent finishing, decatizing, impregnating,
mending and burling) where the value of the unprinted goods
of heading Nos 6213 and 6214 used does not exceed 47.5% of
the ex-works price of the product
|
|
| 6217 |
Other
made up clothing accessories; parts of garments or of
clothing accessories, other than those of heading No
6212: |
|
|
| |
-
Embroidered |
Manufacture from yarn1
or
Manufacture from unembroidered fabric
provided the value of the unembroidered fabric used does
not exceed 40% of the ex-works price of the
product1
|
|
| |
-
Fire resistant equipment of fabric covered with foil of
aluminized polyester |
Manufacture from yarn1
or
Manufacture from uncoated fabric provided
the value of the uncoated fabric used does not exceed 40%
of the ex-works price of the product1
|
|
| |
-
Interlinings for collars and cuffs, cut out |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
|
| |
-
Other |
Manufacture from yarn1 |
|
| ex Chapter
63 |
Other
made-up textile articles; sets; worn clothing and worn
textile articles; rags; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 6301 to
6304 |
Blankets, travelling rugs, bed linen etc.; curtains etc.;
other furnishing articles: |
|
|
| |
- Of
felt, of non-wovens |
Manufacture from3 :
- natural fibres, or
- chemical materials or textile
pulp
|
|
| |
-
Other: |
|
|
| |
--
Embroidered |
Manufacture from unbleached single
yarn1,2
or
Manufacture from unembroidered fabric
(other than knitted or crocheted) provided the value of the
unembroidered fabric used does not exceed 40% of the
ex-works price of the product
|
|
| |
--
Other |
Manufacture from unbleached single yarn1,2 |
|
| 6305 |
Sacks
and bags, of a kind used for the packing of goods |
Manufacture from1:
- natural fibres,
- man-made staple fibres not carded or
combed or otherwise processed for spinning, or
- chemical materials or textile
pulp
|
|
| 6306 |
Tarpaulins, awnings and sunblinds; tents; sails for
boats, sailboards or landcraft; camping goods: |
|
|
| |
- Of
non-wovens |
Manufacture from 1,2:
- natural fibres, or
- chemical materials or textile
pulp
|
|
| |
-
Other |
Manufacture from unbleached single yarn1,2 |
|
| 6307 |
Other
made-up articles, including dress patterns |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 6308 |
Sets
consisting of woven fabric and yarn, whether or not with
accessories, for making up into rugs, tapestries, embroidered
table cloths or serviettes or similar textile articles, put
up in packings for retail sale |
Each
item in the set must satisfy the rule which would apply to it
if it were not included in the set. However, non-originating
articles may be incorporated provided their total value does
not exceed 15% of the ex-works price of the set |
|
| ex Chapter
64 |
Footwear; gaiters and the like; except for: |
Manufacture from materials of any heading except for
assemblies of uppers affixed to inner soles or to other sole
components of heading No 6406 |
|
| 6406 |
Parts
of footwear (including uppers whether or not attached to
soles other than outer soles); removable in-soles, heel
cushions and similar articles; gaiters, leggings and similar
articles, and parts thereof |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
65 |
Headgear and parts thereof, except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 6503 |
Felt
hats and other felt headgear, made from the hat bodies, hoods
or plateaux of heading No 6501, whether or not lined or
trimmed |
Manufacture from yarn or textile fibres1 |
|
| 6505 |
Hats
and other headgear, knitted or crocheted, or made up from
lace, felt or other textile fabric, in the piece (but not in
strips), whether or not lined or trimmed; hair-nets of any
material, whether or not lined or trimmed |
Manufacture from yarn or textile fibres1 |
|
| ex Chapter
66 |
Umbrellas, sun umbrellas, walking-sticks, seat-sticks,
whips, riding-crops and parts thereof; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 6601 |
Umbrellas and sun umbrellas (including walking-stick
umbrellas, garden umbrellas and similar
umbrellas) |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| Chapter
67 |
Prepared feathers and down and articles made of feathers
or of down; artificial flowers; articles of human
hair |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
68 |
Articles of stone, plaster, cement, asbestos, mica or
similar materials; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
6803 |
Articles of slate or of agglomerated slate |
Manufacture from worked slate |
|
| ex
6812 |
Articles of asbestos; articles of mixtures with a basis
of asbestos or of mixtures with a basis of asbestos and
magnesium carbonate |
Manufacture from materials of any heading |
|
| ex
6814 |
Articles of mica, including agglomerated or reconstituted
mica, on a support of paper, paperboard or other
materials |
Manufacture from worked mica (including agglomerated or
reconstituted mica) |
|
| Chapter
69 |
Ceramic products |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
70 |
Glass
and glassware; except for : |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
|
ex 7003
ex 7004 and
ex 7005
|
Glass
with a non-reflecting layer |
Manufacture from materials of heading No.
7001 |
|
| 7006 |
Glass
of heading No 7003, 7004 or 7005, bent, edgeworked, engraved,
drilled, enamelled or otherwise worked, but not framed or
fitted with other materials |
Manufacture from materials of heading No 7001 |
|
| 7007 |
Safety glass, consisting of toughened (tempered) or
laminated glass |
Manufacture from materials of heading No 7001 |
|
| 7008 |
Multiple-walled insulating units of glass |
Manufacture from materials of heading No
7001
|
|
| 7009 |
Glass
mirrors, whether or not framed, including rear-view
mirrors |
Manufacture from materials of heading No 7001 |
|
| 7010 |
Carboys, bottles, flasks, jars, pots, phials, ampoules
and other containers, of glass, of a kind used for the
conveyance or packing of goods; preserving jars of glass;
stoppers, lids and other closures, of glass |
Manufacture in which all the materials used
are classified within a heading other than that of the
product
or
Cutting of glassware, provided the value
of the uncut glassware does not exceed 50% of the ex-works
price of the product
|
|
| 7013 |
Glassware of a kind used for table, kitchen, toilet,
office, indoor decoration or similar purposes (other than
that of heading No 7010 or 7018) |
Manufacture in which all the materials used
are classified within a heading other than that of the
product
or
Cutting of glassware, provided the value
of the uncut glassware does not exceed 50% of the ex-works
price of the product
or
Hand-decoration (with the exception of
silk-screen printing) of hand-blown glassware, provided the
value of the hand-blown glassware does not exceed 50% of
the ex-works price of the product
|
|
| ex
7019 |
Articles (other than yarn) of glass fibres |
Manufacture from:
- uncoloured slivers, rovings, yarn or
chopped strands, or
- glass wool
|
|
| ex Chapter
71 |
Natural or cultured pearls, precious or semi-precious
stones, precious metals, metals clad with precious metal, and
articles thereof; imitation jewellery; coin; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
7101 |
Natural or cultured pearls, graded and temporarily strung
for convenience of transport |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
|
ex 7102,
ex 7103 and
ex 7104
|
Worked precious or semi-precious stones (natural,
synthetic or reconstructed) |
Manufacture from unworked precious or semi-precious
stones |
|
| 7106, 7108 and
7110 |
Precious metals: |
|
|
| |
-
Unwrought |
Manufacture from materials not classified
within heading No 7106, 7108 or 7110
or
Electrolytic, thermal or chemical
separation of precious metals of heading No 7106, 7108 or
7110
or
Alloying of precious metals of heading No
7106, 7108 or 7110 with each other or with base
metals
|
|
| |
-
Semi-manufactured or in powder form |
Manufacture from unwrought precious metals |
|
|
ex 7107,
ex 7109 and
ex 7111
|
Metals clad with precious metals,
semi-manufactured |
Manufacture from metals clad with precious metals,
unwrought |
|
| 7116 |
Articles of natural or cultured pearls, precious or
semi-precious stones (natural, synthetic or
reconstructed) |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 7117 |
Imitation jewellery |
Manufacture in which all the materials used
are classified within a heading other than that of the
product
or
|
|
| |
|
Manufacture from base metal parts, not plated or covered
with precious metals, provided the value of all the materials
used does not exceed 50% of the ex-works price of the
product |
|
| ex Chapter
72 |
Iron
and steel; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 7207 |
Semi-finished products of iron or non-alloy
steel |
Manufacture from materials of heading No 7201, 7202,
7203, 7204 or 7205 |
|
| 7208 to
7216 |
Flat
rolled products, bars and rods, angles, shapes and sections
of iron or non-alloy steel |
Manufacture from ingots or other primary forms of heading
No 7206 |
|
| 7217 |
Wire
of iron or non-alloy steel |
Manufacture from semi-finished materials of heading No
7207 |
|
| ex 7218, 7219 to
7222 |
Semi-finished products, flat rolled products, bars and
rods, angles, shapes and sections of stainless
steel |
Manufacture from ingots or other primary forms of heading
No 7218 |
|
| 7223 |
Wire
of stainless steel |
Manufacture from semi-finished materials of heading No
7218 |
|
| ex 7224, 7225 to
7228 |
Semi-finished products, flat rolled products, hot-rolled
bars and rods, in irregularly wound coils; angles, shapes and
sections, of other alloy steel; hollow drill bars and rods,
of alloy or non-alloy steel |
Manufacture from ingots or other primary forms of heading
No 7206, 7218 or 7224 |
|
| 7229 |
Wire
of other alloy steel |
Manufacture from semi-finished materials of heading No
7224 |
|
| ex Chapter
73 |
Articles of iron or steel; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
7301 |
Sheet
piling |
Manufacture from materials of heading No 7206 |
|
| 7302 |
Railway or tramway track construction materials of iron
or steel, the following: rails, checkrails and rackrails,
switch blades, crossing frogs, point rods and other crossing
pieces, sleepers (cross-ties), fishplates, chairs, chair
wedges, sole pates (base plates), rail clips, bedplates, ties
and other material specialized for jointing or fixing
rails |
Manufacture from materials of heading No 7206 |
|
| 7304, 7305 and
7306 |
Tubes, pipes and hollow profiles, of iron (other than
cast iron) or steel |
Manufacture from materials of heading No 7206, 7207, 7218
or 7224 |
|
| ex
7307 |
Tube
or pipe fittings of stainless steel (ISO No X5CrNiMo 1712),
consisting of several parts |
Turning, drilling, reaming, threading, deburring and
sandblasting of forged blanks the value of which does not
exceed 35% of the ex-works price of the product |
|
| 7308 |
Structures (excluding prefabricated buildings of heading
No 9406) and parts of structures (for example, bridges and
bridge-sections, lock-gates, towers, lattice masts, roofs,
roofing frameworks, doors and windows and their frames and
thresholds for doors, shutters, balustrades, pillars and
columns), of iron or steel; plates, rods, angles, shapes,
sections, tubes and the like, prepared for use in structures,
of iron or steel |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, welded angles, shapes and sections of heading No
7301 may not be used |
|
| ex
7315 |
Skid
chains |
Manufacture in which the value of all the materials of
heading No 7315 used does not exceed 50% of the ex-works
price of the product |
|
| ex Chapter
74 |
Copper and articles thereof; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 7401 |
Copper mattes; cement copper (precipitated
copper) |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 7402 |
Unrefined copper; copper anodes for electrolytic
refining |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 7403 |
Refined copper and copper alloys, unwrought: |
|
|
| |
-
Refined copper |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| |
-
Copper alloys and refined copper containing other
elements |
Manufacture from refined copper, unwrought, or waste and
scrap of copper |
|
| 7404 |
Copper waste and scrap |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 7405 |
Master alloys of copper |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
75 |
Nickel and articles thereof; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 7501 to
7503 |
Nickel mattes, nickel oxide sinters and other
intermediate products of nickel metallurgy; unwrought nickel;
nickel waste and scrap |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
76 |
Aluminium and articles thereof; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 7601 |
Unwrought aluminium |
Manufacture by thermal or electrolytic treatment from
unalloyed aluminium or waste and scrap of
aluminium |
|
| 7602 |
Aluminium waste or scrap |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
7616 |
Aluminium articles other than gauze, cloth, grill,
netting, fencing, reinforcing fabric and similar materials
(including endless bands) of aluminium wire, and expanded
metal of aluminium |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product. However,
gauze, cloth, grill, netting, fencing, reinforcing fabric
and similar materials (including endless bands) of
aluminium wire, or expanded metal of aluminium may be
used;
|
|
| |
|
- the
value of all the materials used does not exceed 50% of the
ex-works price of the product |
|
| Chapter
77 |
Reserved for possible future use in HS |
|
|
| ex Chapter
78 |
Lead
and articles thereof; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 7801 |
Unwrought lead: |
|
|
| |
-
Refined lead |
Manufacture from "bullion" or "work"
lead |
|
| |
-
Other |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, waste and scrap of heading No 7802 may not be
used |
|
| 7802 |
Lead
waste and scrap |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
79 |
Zinc
and articles thereof; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 7901 |
Unwrought zinc |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, waste and scrap of heading No 7902 may not be
used |
|
| 7902 |
Zinc
waste and scrap |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
80 |
Tin
and articles thereof; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 8001 |
Unwrought tin |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, waste and scrap of heading No 8002 may not be
used |
|
| 8002 and
8007 |
Tin
waste and scrap; other articles of tin |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| Chapter
81 |
Other
base metals; cermets; articles thereof: |
|
|
| |
-
Other base metals, wrought; articles thereof |
Manufacture in which the value of all the materials
classified within the same heading as the product used does
not exceed 50% of the ex-works price of the
product |
|
| |
-
Other |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex Chapter
82 |
Tools, implements, cutlery, spoons and forks, of base
metal; parts thereof of base metal; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 8206 |
Tools
of two or more of the heading Nos 8202 to 8205, put up in
sets for retail sale |
Manufacture in which all the materials used are
classified within a heading other than heading Nos 8202 to
8205. However, tools of heading Nos 8202 to 8205 may be
incorporated into the set provided their value does not
exceed 15% of the ex-works price of the set |
|
| 8207 |
Interchangeable tools for hand tools, whether or not
power-operated, or for machine-tools (for example, for
pressing, stamping, punching, tapping, threading, drilling,
boring, broaching, milling, turning, or screwdriving),
including dies for drawing or extruding metal, and rock
drilling or earth boring tools |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
|
| 8208 |
Knives and cutting blades, for machines or for mechanical
appliances |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
|
| ex
8211 |
Knives with cutting blades, serrated or not (including
pruning knives), other than knives of heading No
8208 |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, knife blades and handles of base metal may be
used |
|
| 8214 |
Other
articles of cutlery (for example, hair clippers, butchers' or
kitchen cleavers, choppers and mincing knives, paper knives);
manicure or pedicure sets and instruments (including nail
files) |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, handles of base metal may be used |
|
| 8215 |
Spoons, forks, ladles, skimmers, cake-servers,
fish-knives, butterknives, sugar tongs and similar kitchen or
tableware |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, handles of base metal may be used |
|
| ex Chapter
83 |
Miscellaneous articles of base metal; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| ex
8302 |
Other
mountings, fittings and similar articles suitable for
buildings, and automatic door closers |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, the other materials of heading No 8302 may be used
provided their value does not exceed 20% of the ex-works
price of the product |
|
| ex
8306 |
Statuettes and other ornaments, of base metal |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, the other materials of heading No 8306 may be used
provided their value does not exceed 30% of the ex-works
price of the product |
|
| ex Chapter
84 |
Nuclear reactors, boilers, machinery and mechanical
appliances; parts thereof; except for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex
8401 |
Nuclear fuel elements |
Manufacture in which all the materials used are
classified within a heading other than that of the
product1 |
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8402 |
Steam
or other vapour generating boilers (other than central
heating hot water boilers capable also of producing low
pressure steam); super heated water boilers |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8403 and ex
8404 |
Central heating boilers other than those of heading No
8402 and auxiliary plant for central heating
boilers |
Manufacture in which all the materials used are
classified within a heading other than heading No 8403 or
8404 |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 8406 |
Steam
turbines and other vapour turbines |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8407 |
Spark-ignition reciprocating or rotary internal
combustion piston engines |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8408 |
Compression-ignition internal combustion piston engines
(diesel or semi-diesel engines) |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8409 |
Parts
suitable for use solely or principally with the engines of
heading No 8407 or 8408 |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8411 |
Turbo-jets, turbo propellers and other gas
turbines |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8412 |
Other
engines and motors |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| ex
8413 |
Rotary positive displacement pumps |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| ex
8414 |
Industrial fans, blowers and the like |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8415 |
Air
conditioning machines, comprising a motor-driven fan and
elements for changing the temperature and humidity, including
those machines in which the humidity cannot be separately
regulated |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8418 |
Refrigerators, freezers and other refrigerating or
freezing equipment, electric or other; heat pumps other than
air conditioning machines of heading No 8415 |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product;
- the value of all the non-originating
materials used does not exceed the value of the originating
materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| ex
8419 |
Machines for wood, paper pulp and paperboard
industries |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within the same heading as the product
are only used up to a value of 25% of the ex-works price of
the product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8420 |
Calendering or other rolling machines, other than for
metals or glass, and cylinders therefor |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within the same heading as the product
are only used up to a value of 25% of the ex-works price of
the product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8423 |
Weighing machinery (excluding balances of a sensitivity
of 5 cg or better), including weight operated counting or
checking machines; weighing machine weights of all
kinds |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8425 to
8428 |
Lifting, handling, loading or unloading
machinery |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8431 are only used
up to a value of 10% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8429 |
Self-propelled bulldozers, angledozers, graders,
levellers, scrapers, mechanical shovels, excavators, shovel
loaders, tamping machines and road rollers: |
|
|
| |
-
Road rollers |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| |
-
Other |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8431 are only used
up to a value of 10% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8430 |
Other
moving, grading, levelling, scraping, excavating, tamping,
compacting, extracting or boring machinery, for earth,
minerals or ores; pile-drivers and pile-extractors;
snow-ploughs and snow-blowers |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
value of the materials classified within heading No 8431
are only used up to a value of 10% of the ex-works price of
the product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex
8431 |
Parts
suitable for use solely or principally with road
rollers |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8439 |
Machinery for making pulp of fibrous cellulosic material
or for making or finishing paper or paperboard |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within the same heading as the product
are only used up to a value of 25% of the ex-works price of
the product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8441 |
Other
machinery for making up paper pulp, paper or paperboard,
including cutting machines of all kinds |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within the same heading as the product
are only used up to a value of 25% of the ex-works price of
the product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8444 to
8447 |
Machines of these headings for use in the textile
industry |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| ex
8448 |
Auxiliary machinery for use with machines of headings Nos
8444 and 8445 |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8452 |
Sewing machines, other than book-sewing machines of
heading No 8440; furniture, bases and covers specially
designed for sewing machines; sewing machine
needles: |
|
|
| |
-
Sewing machines (lock stitch only) with heads of a weight not
exceeding 16 kg without motor or 17 kg with motor |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used in assembling the head
(without motor) does not exceed the value of the
originating materials used;
- the thread tension, crochet and zigzag
mechanisms used are already originating
|
|
| |
-
Other |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
|
8456 to
8466
|
Machine-tools and machines and their parts and
accessories of headings Nos 8456 to 8466 |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8469 to
8472 |
Office machines (for example, typewriters, calculating
machines, automatic data processing machines, duplicating
machines, stapling machines) |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8480 |
Moulding boxes for metal foundry; mould bases; moulding
patterns; moulds for metal (other than ingot moulds), metal
carbides, glass, mineral materials, rubber or
plastics |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 8482 |
Ball
or roller bearings |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8484 |
Gaskets and similar joints of metal sheeting combined
with other material or of two or more layers of metal; sets
or assortments of gaskets and similar joints, dissimilar in
composition, put up in pouches, envelopes or similar
packings; mechanical seals |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8485 |
Machinery parts, not containing electrical connectors,
insulators, coils, contacts or other electrical features, not
specified or included elsewhere in this Chapter |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| ex Chapter
85 |
Electrical machinery and equipment and parts thereof;
sound recorders and reproducers, television image and sound
recorders and reproducers, and parts and accessories of such
articles; except for: |
Manufacture in which
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8501 |
Electric motors and generators (excluding generating
sets) |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8503 are only used
up to a value of 10% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8502 |
Electric generating sets and rotary
converters |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8501 or 8503, taken
together, are only used up to a value of 10% of the
ex-works price of the product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex
8504 |
Power
supply units for automatic data-processing
machines |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| ex
8518 |
Microphones and stands therefor; loudspeakers, whether or
not mounted in their enclosures; audio-frequency electric
amplifiers; electric sound amplifier sets |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8519 |
Turntables (record-decks), record-players, cassette-
players and other sound reproducing apparatus, not
incorporating a sound recording device |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8520 |
Magnetic tape recorders and other sound recording
apparatus, whether or not incorporating a sound reproducing
device |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8521 |
Video
recording or reproducing apparatus, whether or not
incorporating a video tuner |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8522 |
Parts
and accessories suitable for use solely or principally with
the apparatus of heading Nos 8519 to 8521 |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8523 |
Prepared unrecorded media for sound recording or similar
recording of other phenomena, other than products of Chapter
37 |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8524 |
Records, tapes and other recorded media for sound or
other similarly recorded phenomena, including matrices and
masters for the production of records, but excluding products
of Chapter 37: |
|
|
| |
-
Matrices and masters for the production of
records |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| |
-
Other |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8523 are only used
up to a value of 10% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8525 |
Transmission apparatus for radio-telephony,
radio-telegraphy, radio-broadcasting or television, whether
or not incorporating reception apparatus or sound recording
or reproducing apparatus; television cameras; still image
video cameras and other video camera recorders |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8526 |
Radar
apparatus, radio navigational aid apparatus and radio remote
control apparatus |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8527 |
Reception apparatus for radio-telephony, radio-telegraphy
or radio broadcasting, whether or not combined, in the same
housing, with sound recording or reproducing apparatus or a
clock |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8528 |
Reception apparatus for television, whether or not
incorporating radio broadcast receivers or sound or video
recording or reproducing apparatus; video monitors and video
projectors |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8529 |
Parts
suitable for use solely or principally with the apparatus of
heading Nos 8525 to 8528: |
|
|
| |
-
Suitable for use solely or principally with video recording
or reproducing apparatus |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| |
-
Other |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8535 and
8536 |
Electrical apparatus for switching or protecting
electrical circuits, or for making connections to or in
electrical circuits |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8538 are only used
up to a value of 10% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8537 |
Boards, panels, consoles, desks, cabinets and other
bases, equipped with two or more apparatus of heading No 8535
or 8536, for electric control or the distribution of
electricity, including those incorporating instruments or
apparatus of Chapter 90, and numerical control apparatus,
other than switching apparatus of heading No 8517 |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8538 are only used
up to a value of 10% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex
8541 |
Diodes, transistors and similar semi-conductor devices,
except wafers not yet cut into chips |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8542 |
Electronic integrated circuits and
microassemblies |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 8541 or 8542, taken
together, are only used up to a value of 10% of the
ex-works price of the product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 8544 |
Insulated (including enamelled or anodised) wire, cable
(including coaxial cable) and other insulated electric
conductors, whether or not fitted with connectors; optical
fibre cables, made up of individually sheathed fibres,
whether or not assembled with electric conductors or fitted
with connectors |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8545 |
Carbon electrodes, carbon brushes, lamp carbons, battery
carbons and other articles of graphite or other carbon, with
or without metal, of a kind used for electrical
purposes |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8546 |
Electrical insulators of any material |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8547 |
Insulating fittings for electrical machines, appliances
or equipment, being fittings wholly of insulating materials
apart from any minor components of metal (for example,
threaded sockets) incorporated during moulding solely for
purposes of assembly other than insulators of heading No
8546; electrical conduit tubing and joints therefor, of base
metal lined with insulating material |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8548 |
Waste
and scrap of primary cells, primary batteries and electric
accumulators; spent primary cells, spent primary batteries
and spent electric accumulators; electrical parts of
machinery or apparatus, not specified or included elsewhere
in this Chapter |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| ex Chapter
86 |
Railway or tramway locomotives, rolling stock and parts
thereof; railway or tramway track fixtures and fittings and
parts thereof; mechanical (including electro-mechanical)
traffic signaling equipment of all kinds; except
for: |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8608 |
Railway or tramway track fixtures and fittings;
mechanical (including electro-mechanical) signalling, safety
or traffic control equipment for railways, tramways, roads,
inland waterways, parking facilities, port installations or
airfields; parts of the foregoing |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex Chapter
87 |
Vehicles other than railway or tramway rolling-stock, and
parts and accessories thereof; except for: |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 8709 |
Works
trucks, self-propelled, not fitted with lifting or handling
equipment, of the type used in factories, warehouses, dock
areas or airports for short distance transport of goods;
tractors of the type used on railway station platforms; parts
of the foregoing vehicles |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8710 |
Tanks
and other armoured fighting vehicles, motorized, whether or
not fitted with weapons, and parts of such
vehicles |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8711 |
Motorcycles (including mopeds) and cycles fitted with an
auxiliary motor, with or without side-cars;
side-cars: |
|
|
| |
-
With reciprocating internal combustion piston engine of a
cylinder capacity: |
|
|
| |
--
Not exceeding 50 cc |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex- works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 20%
of the ex-works price of the product |
| |
--
Exceeding 50 cc |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| |
-
Other |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex
8712 |
Bicycles without ball bearings |
Manufacture from materials not classified in heading No
8714 |
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8715 |
Baby
carriages and parts thereof |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 8716 |
Trailers and semi-trailers; other vehicles, not
mechanically propelled; parts thereof |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex Chapter
88 |
Aircraft, spacecraft, and parts thereof; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex
8804 |
Rotochutes |
Manufacture from materials of any heading including other
materials of heading No 8804 |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| 8805 |
Aircraft launching gear; deck-arrestor or similar gear;
ground flying trainers; parts of the foregoing
articles |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| Chapter
89 |
Ships, boats and floating structures |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, hulls of heading No 8906 may not be used |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| ex Chapter
90 |
Optical, photographic, cinematographic, measuring,
checking, precision, medical or surgical instruments and
apparatus; parts and accessories thereof; except
for: |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9001 |
Optical fibres and optical fibre bundles; optical fibre
cables other than those of heading No 8544; sheets and plates
of polarizing material, lenses (including contact lenses),
prisms, mirrors and other optical elements, of any material,
unmounted, other than such elements of glass not optically
worked |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9002 |
Lenses, prisms, mirrors and other optical elements, of
any materials, mounted, being parts of or fittings for
instruments or apparatus, other than such elements of glass
not optically worked |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9004 |
Spectacles, goggles and the like, corrective, protective
or other |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| ex
9005 |
Binoculars, monoculars, other optical telescopes, and
mountings therefor, except for astronomical refracting
telescopes and mountings therefor |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product;
- the value of all the non-originating
materials used does not exceed the value of the originating
materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex
9006 |
Photographic (other than cinematographic) cameras;
photographic flashlight apparatus and flashbulbs other than
electrically ignited flashbulbs |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product;
- the value of all the non-originating
materials used does not exceed the value of the originating
materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9007 |
Cinematographic cameras and projectors, whether or not
incorporating sound recording or reproducing
apparatus |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product;
- the value of all the non-originating
materials used does not exceed the value of the originating
materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9011 |
Compound optical microscopes, including those for
photomicrography, cinephotomicrography or
microprojection |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product;
- the value of all the non-originating
materials used does not exceed the value of the originating
materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| ex
9014 |
Other
navigational instruments and appliances |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9015 |
Surveying (including photogrammetrical surveying),
hydrographic, oceanographic, hydrological, meteorological or
geophysical instruments and appliances, excluding compasses;
rangefinders |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9016 |
Balances of a sensitivity of 5 cg or better, with or
without weights |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9017 |
Drawing, marking-out or mathematical calculating
instruments (for example, drafting machines, pantographs,
protractors, drawing sets, slide rules, disc calculators);
instruments for measuring length, for use in the hand (for
example, measuring rods and tapes, micrometers, callipers),
not specified or included elsewhere in this
Chapter |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9018 |
Instruments and appliances used in medical, surgical,
dental or veterinary sciences, including scintigraphic
apparatus, other electro-medical apparatus and sight-testing
instruments: |
|
|
| |
-
Dentists' chairs incorporating dental appliances or dentists'
spittoons |
Manufacture from materials of any heading, including
other materials of heading No 9018 |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| |
-
Other |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 9019 |
Mechano-therapy appliances; massage apparatus;
psychological aptitude-testing apparatus; ozone therapy,
oxygen therapy, aerosol therapy, artificial respiration or
other therapeutic respiration apparatus |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 9020 |
Other
breathing appliances and gas masks, excluding protective
masks having neither mechanical parts nor replaceable
filters |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 25%
of the ex-works price of the product |
| 9024 |
Machines and appliances for testing the hardness,
strength, compressibility, elasticity or other mechanical
properties of materials (for example, metals, wood, textiles,
paper, plastics) |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9025 |
Hydrometers and similar floating instruments,
thermometers, pyrometers, barometers, hygrometers and
psychrometers, recording or not, and any combination of these
instruments |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9026 |
Instruments and apparatus for measuring or checking the
flow, level, pressure or other variables of liquids or gases
(for example, flow meters, level gauges, manometers, heat
meters), excluding instruments and apparatus of heading No
9014, 9015, 9028 or 9032 |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9027 |
Instruments and apparatus for physical or chemical
analysis (for example, polarimeters, refractometers,
spectrometers, gas or smoke analysis apparatus); instruments
and apparatus for measuring or checking viscosity, porosity,
expansion, surface tension or the like; instruments and
apparatus for measuring or checking quantities of heat, sound
or light (including exposure meters); microtomes |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9028 |
Gas,
liquid or electricity supply or production meters, including
calibrating meters therefor: |
|
|
| |
-
Parts and accessories |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| |
-
Other |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9029 |
Revolution counters, production counters, taximeters,
milometers, pedometers and the like; speed indicators and
tachometers, other than those of heading Nos 9014 or 9015;
stroboscopes |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9030 |
Oscilloscopes, spectrum analysers and other instruments
and apparatus for measuring or checking electrical
quantities, excluding meters of heading No 9028; instruments
and apparatus for measuring or detecting alpha, beta, gamma,
X-ray, cosmic or other ionizing radiations |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9031 |
Measuring or checking instruments, appliances and
machines, not specified or included elsewhere in this
Chapter; profile projectors |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9032 |
Automatic regulating or controlling instruments and
apparatus |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9033 |
Parts
and accessories (not specified or included elsewhere in this
Chapter) for machines, appliances, instruments or apparatus
of Chapter 90 |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| ex Chapter
91 |
Clocks and watches and parts thereof; except
for: |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| 9105 |
Other
clocks |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9109 |
Clock
movements, complete and assembled |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where the value of all the
non-originating materials used does not exceed the value of
the originating materials used
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9110 |
Complete watch or clock movements, unassembled or partly
assembled (movement sets); incomplete watch or clock
movements, assembled; rough watch or clock
movements |
Manufacture:
- in which the value of all the materials
used does not exceed 40% of the ex-works price of the
product;
- where, within the above limit, the
materials classified within heading No 9114 are only used
up to a value of 10% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9111 |
Watch
cases and parts thereof |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9112 |
Clock
cases and cases of a similar type for other goods of this
Chapter, and parts thereof |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 40% of the ex-works price of the
product
|
Manufacture in
which the value of all the materials used does not exceed 30%
of the ex-works price of the product |
| 9113 |
Watch
straps, watch bands and watch bracelets, and parts
thereof: |
|
|
| |
- Of
base metal, whether or not plated, or of clad precious
metal |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| |
-
Other |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| Chapter
92 |
Musical instruments; parts and accessories of such
articles |
Manufacture in which the value of all the materials used
does not exceed 40% of the ex-works price of the
product |
|
| Chapter
93 |
Arms
and ammunition; parts and accessories thereof |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| ex Chapter
94 |
Furniture; bedding, mattresses, mattress supports,
cushions and similar stuffed furnishings; lamps and lighting
fittings, not elsewhere specified or included; illuminated
signs, illuminated nameplates and the like; prefabricated
buildings; except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex works price of the product |
|
ex 9401 and
ex 9403
|
Base
metal furniture, incorporating unstuffed cotton cloth of a
weight of 300 g/m2 or less |
Manufacture in which all the materials used
are classified in a heading other than that of the
product
or
Manufacture from cotton cloth already
made up in a form ready for use of heading No 9401 or 9403,
provided:
|
Manufacture in
which the value of all the materials used does not exceed 40%
of the ex-works price of the product |
| |
|
- its value does not exceed 25% of the
ex-works price of the product;
- all the other materials used are
already originating and are classified in a heading other
than heading No 9401 or 9403
|
|
| 9405 |
Lamps
and lighting fittings including searchlights and spotlights
and parts thereof, not elsewhere specified or included;
illuminated signs, illuminated name-plates and the like,
having a permanently fixed light source, and parts thereof
not elsewhere specified or included |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 9406 |
Prefabricated buildings |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| ex Chapter
95 |
Toys,
games and sports requisites; parts and accessories thereof;
except for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
| 9503 |
Other
toys; reduced-size ("scale") models and similar
recreational models, working or not; puzzles of all
kinds |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| ex
9506 |
Golf
clubs and parts thereof |
Manufacture in which all the materials used are
classified within a heading other than that of the product.
However, roughly shaped blocks for making golf club heads may
be used |
|
| ex Chapter
96 |
Miscellaneous manufactured articles; except
for: |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
|
ex 9601 and
ex 9602
|
Articles of animal, vegetable or mineral carving
materials |
Manufacture from "worked" carving materials of
the same heading |
|
| ex
9603 |
Brooms and brushes (except for besoms and the like and
brushes made from marten or squirrel hair), hand-operated
mechanical floor sweepers, not motorized, paint pads and
rollers, squeegees and mops |
Manufacture in which the value of all the materials used
does not exceed 50% of the ex-works price of the
product |
|
| 9605 |
Travel sets for personal toilet, sewing or shoe or
clothes cleaning |
Each
item in the set must satisfy the rule, which would apply to
it if it were not included in the set. However,
non-originating articles may be incorporated, provided their
total value does not exceed 15% of the ex-works price of the
set |
|
| 9606 |
Buttons, press-fasteners, snap-fasteners and press-studs,
button moulds and other parts of these articles; button
blanks |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| 9612 |
Typewriter or similar ribbons, inked or otherwise
prepared for giving impressions, whether or not on spools or
in cartridges; ink-pads, whether or not inked, with or
without boxes |
Manufacture in which:
- all the materials used are classified
within a heading other than that of the product;
- the value of all the materials used
does not exceed 50% of the ex-works price of the
product
|
|
| ex
9613 |
Lighters with piezo-igniter |
Manufacture in which the value of all the materials of
heading No 9613 used does not exceed 30% of the ex-works
price of the product |
|
|
ex 9614
|
Smoking pipes and pipe bowls |
Manufacture from roughly shaped blocks |
|
| Chapter
97 |
Works
of art, collectors' pieces and antiques |
Manufacture in which all the materials used are
classified within a heading other than that of the
product |
|
1. Certificates must not contain erasures or
words written over one another. Any alterations must be made by
deleting the incorrect particulars and adding any necessary
corrections. Any such alteration must be initialled by the person
who completed the certificate and endorsed by the customs
authorities of the issuing country or territory.
2. No spaces must be left between the items
entered on the certificate and each item must be preceded by an
item number. A horizontal line must be drawn immediately below
the last item. Any unused space must be struck through in such a
manner as to make any later additions impossible.
3. Goods must be described in accordance with
commercial practice and with sufficient detail to enable them to
be identified.
DECLARE that the goods meet the conditions
required for the issue of the attached certificate;
SPECIFY as follows the circumstances which
have enabled these goods to meet the above conditions:
UNDERTAKE to submit, at the request of the
appropriate authorities, any supporting evidence which these
authorities may require for the purpose of issuing the attached
certificate, and undertake, if required, to agree to any
inspections of my accounts and to any check on the processes of
manufacture of the above goods, carried out by the said
authorities;
REQUEST the issue of the attached certificate
for these goods.
The invoice declaration, the text of which is
given below, must be made out in accordance with the footnotes.
However, the footnotes do not have to be reprodeced.
Ebu belge (Gü mrü k Onay No: ..... 1 ) kapsam? ndaki maddelerin ihracat? ? s? , aksi a? ?
k? a belirtilmedik? e, bu maddelerin ...... 2 tercihli men? ? ? unu beyan eder.
Eksportētājs, produktiem, kuri ietverti tajā
dokumentā (muitas pilnvara Nr. ..... 1 ) deklarē, ka
izņemot tur, kur ir citādi skaidri noteikts, tiem produktiem ir
priekšrocību izcelsme no ..... 2 .
The exporter of the products covered by this
document (customs authorization No .... 1 ) declares
that, except where otherwise clearly indicated, these products
are of ..... preferential origin 2 .
